Some customers want to take a lighter to light the SPC floor to see if it can burn. If it burns, it is not fire safety, and if it doesn&#;t burn, it is flame retardant.In fact, the national regulations on the flame retardant grade of PVC latch floor meet the B Standard, and the flame retardant raw materials are listed as class a fire safety according to the national standard, such as marble, wall tiles, etc.The technology of Class B flame retardant grade includes mm diameter cotton wool, sprinkled with ethanol, and placed on the PVC latch floor for natural ignition. After the cotton wool is burned, accurately measure the diameter of the burned PVC latch floor impression. If it is less than mm, it is Class B flame retardant grade.Instead of watching it burn.SPC floor has several advantages: imitation of water, imitation of fire, formaldehyde, anti oil stain,PuntaCanaWhat color does floor leather look good, can replace ceramic tile and wood floor.Applicable to all major tooling and home decoration.For example, hospitals, schools, hotels, hotels,PuntaCanaLaminate flooring picture, restaurants and other places.PuntaCana,First, polish the damaged place with water abrasive paper dipped in soap liquid, and then repair the eyebrow after finishing, and then brush the paint. It must be dry for less than hours, then polish the damaged place with water abrasive paper, and then wipe the floor wax for polishing.Defects: poor wear resistance, no fire prevention, no corrosion resistance, very easy to regain moisture, deformation, thermal deformation, folding, and must be polished and waxed on time, which is difficult for medical treatment.El Hamma,Common types: three-layer solid wood composite floor, double-layer solid wood composite floor, new solid wood composite board.The surface texture of solid wood floor is clear and natural, there will be some hidden dangers if the crack passes through the texture.Foot feel

In fact, of the inspection indexes of floor leather, such as wear resistance, water resistance pollution resistance and flame resistance, are improved with the hardness of floor leather.Therefore, expert Construction: when purchasing floor leather, as long as the surface meets the wear-resistant requirements, there is no need to demand softness, so as to facilitate the comprehensive improvement of other properties.Floor lacquer cloth (also known as floor leather and insulating floor rubber roll) is one of the indispensable or missing floor materials for the decoration of modern power distribution room, substation and communication room. It is not only beautiful and practical, but also has the characteristics of sound and moisture insulation, wear resistance and corrosion resistance. It can be used not only on the floor of living room, but also on the floor of workshop.The ground of the weak point machine room. The construction of installation works is convenient.Stability: completely disperse the original wood mechanism, destroy the characteristics of various wet expansion and contraction, and the specification is very stable, especially for rooms with heating system.High value, Super wear-resistant. The wear-resistant layer on the surface of SPC floor is a transparent wear-resistant layer processed by high technology,PuntaCanaHow much is the flat wood floor, and its wear-resistant revolution can reach about revolutions.According to the thickness of wear-resistant layer, the service life of SPC floor is more than - years.SPC floor is a long-life floor, especially suitable for public places with large flow of people and high degree of wear.However, does not contain toxic substances such as formaldehyde and benzene, and does not have radiation. It is a green environmental protection decoration material and will not cause harm to human body. Veneer method: stick the wood veneer on the board surface.For example the high price solid wood veneer is pasted on the low price solid wood floor. Although this is also the solid wood floor, it deceives consumers.

The first is cleaning to remove oil stains or dust;The second is leveling. The convex part shall be shoveled and polished. The concave part can be made into paste with glue and cement at the weight ratio of :, leveled with a spatula, and then leveled with sandpaper after drying.After the ground is flat, clean and dry, it can be glued and paved.Gluing is the last process before paving, and the tool shall be a toothed rubber scraper.During gluing, glue shall be applied on the ground according to the size of the floor paint cloth, and one piece shall be paved in this order.A width of cm shall be reserved at the joint of the floor paint cloth. No glue shall be applied first, it can be paved. When pasting, pay attention to aligning the sidelines, and use a long handle floor brush to blow out and compact.The joints are generally spliced by overlapping cutting, and the overlapping width is about cm.Align the long steel ruler with the center of the overlap, cut with a cutter along the ruler, then remove the cut edge strips (note that there should be two edge strips don&#;t forget to take out the lower one), apply an appropriate amount of glue to the joint with a paint brush, check whether there are bubbles and whether they are flat.If there are bubbles, use a syringe to insert and suck out the air, use washing powder to remove the residual glue marks on the lacquer cloth. If they cannot be removed they can be wiped with alcohol.In this way, the whole process will be completed.Due to the improvement of the living standards of Chinese residents, the grade of interior decoration is also rising, and the decoration materials are increasingly developing towards the fixed decoration direction of elegance, high profile, long service life and good effect.As for the ground, the service life of paint, carpet or ordinary floor leather and floor brick is not as long as that of ground lacquer cloth.Range,After the solid wood floor is transported to the project installation site, it shall not be unpacked and installed immediately.After unpacking it must be kept indoors for more than one week.The solid wood floor can be used only after it is adapted to the temperature and humidity of the room.Easy to clean: simple, bright as a new mouth, dust-free, very easy to clean.qualityPuntaCana, Select substrate densityOnly ~ mm thick. The conventional thickness is only -mm. The ultra-thin design is a bold innovation in the professional industry. The surface is printed with materials to improve the service life of people flow field. The surface imitates the real wood texture and natural marble texture. In view of the characteristics of raw materials, it has fast heat conduction and long heat storage duration. It is the preferred floor for floor heating.