After - floors are assembled on the flat ground, observe whether the processing accuracy is flat and smooth, whether the tenon and groove bite is appropriate, carefully check the assembly height difference and gap between floors. Look at the section of the board.Ahuachapan,The legendary Luban was the man who opened the mountain, wooden land Good fire resistanceSubotica, Identify from the packagequalityWhat is the difference between solid wood flooring and solid wood composite flooring?

Laminate flooring has reached grade B and has higher flame retardant performance, which is safer than other kinds of wood flooringAfter - wooden floors are assembled on the flat ground, touch them with your hands and check with your eyes to see whether the processing accuracy is smooth and smooth, and whether the tenon and groove teeth bite is suitable. It can not be very loose or too tight.Carefully assemble the height width ratio difference and gap.In modern home life, laminate flooring is deeply loved by consumers because of its excellent wear resistance and low price.However, the content of formaldehyde has been perplexing everyone, and because of the blindness of consumers, they don&#;t know much about formaldehyde.Therefore, we are still cautious about choosing to buy Laminate flooring.So what is formaldehyde?In addition, pay attention to whether there are sawdust and stratification on the cutting surface of the plate and whether there are sawdust and stratification on the cutting surface of the solid wood floor.Safety production,SPC floor is an economical floor material. Consumers can enjoy the texture of wood grain or stone grain in use without being bothered by noise.According to the requirements of consumers for sound insulation,AhuachapanOutdoor wood plastic board,AhuachapanWhich is better, laminate floor or composite wood floor, blocks, plates or coils can be selected.Floor lacquer cloth, also known as floor leather (not PVC plastic floor), is a kind of paving material. It belongs to rubber plastic products. It is one of the indispensable floor materials for the decoration of power distribution room, substation and communication room. The thickness is -mm. Other thicknesses can be made according to the needs of users. The wear-resistant layer is generally less than or equal to .mm.The choice of lacquer cloth products shall be selected according to the suitability of the site.For example, the size of the product is determined according to the space of the house and the size of the place of use.At the same time, pay attention to the different places of use, and the selected patterns should also be different.For example, in places that need to be kept clean, you can&#;t choose products with convex effect;In solemn places, it is not suitable to choose products with bright colors and messy.The width of coiled floor paint cloth is mm, mm and mm;The total thickness (referring to the base material, intermediate layer and surface wear-resistant layer) is divided into mm and mm;The length of each roll of floor leather is m and m.Other specifications and dimensions can be determined by the supplier and the buyer through negotiation.Because of the requirements of production, each roll of floor paint cloth is divided into several sections (the patterns between each two sections are misplaced), so the length of the small section of a roll of floor paint cloth with sections shall be indicated, and the length of the roll of floor paint cloth shall be increased by at least cm (i.e. not less than two complete patterns).Generally, there can only be one section for high-quality products, and the number of sections of each volume of first-class products and qualified products shall not exceed ;The length of each section of first-class products shall not be less than m, and the length of each section of qualified products shall not be less than m.When inspecting the appearance quality of floor paint cloth leather, it should be visually inspected obliquely under the scattered sunlight or fluorescent lamp with the illuminance of ( ± LX and LM away from the tested sample.First, observe whether there are cracks, fractures and delaminations on the surface of the floor leather. If so, bubble pollution points and pattern deformation. What cannot be observed are excellent products and first-class products;If it is slight but not obvious, it is deemed as qualified. Go back to the third step to observe whether there are missing patterns on the surface of the floor leather and whether there are defects of the transparent wear-resistant film on the surface. If there is no, it is the first-class product and the first-class product. If there is slight missing or lack of film, it is the qualified product, otherwise it is the unqualified product.Finally, carefully check whether there is deviation during multi-color overprint on the surface, whether the superior products are uneven, and if there are the above two defects the first-class products are those with but not obvious, and the products with obvious above defects but do not affect the overall beauty are determined as qualified products.Finally, based on the above judgment,AhuachapanWood flooring manufacturer production base, the appearance quality of ground lacquer cloth is determined.The plastic coil floor paint cloth shall roll the wear-resistant layer outward on the pipe core and shall be externally packaged.The product name, manufacturer name product mark, grade, batch number, attention should also be paid to the physical properties when purchasing floor leather to ensure its service life. From the characteristics of the floor, it is divided into crystal surface, relief surface, latch, silent, waterproof and so on.The thickness of SPC floor is mainly selected according to personal needs.Of course the floor thickness affects the floor price, and the service life will be different, but it does not mean that the thicker the floor is, the better. We need to select according to whether the installation will affect the door closing or other s;Whether the overall effect after installation will be uncoordinated;Material budget and other aspects to select the most appropriate floor thickness.

Wooden wedges and nails shall not be used for fixing during construction.The contact surface between the wooden wedge and the nail is too small, and the grip strength of the nail is insufficient.Bones are easy to loosen, and people will make a sound when stepping on them.Latest quotation,advantage The main raw material of SPC floor is polyvinyl chloride, which is an environmentally friendly renewable resource.It has been widely used in people&#;s daily life, such as tableware and medical infusion bags, so there is no need to worry about its environmental protection.SPC floor is mainly composed of natural stone powder and does not contain any radioactive elements.It is a new type of green environmental protection floor decoration material. Light and thin.The thickness of SPC floor is mm- mm, and the weight per square meter is only about - kg, less than % of ordinary floor materials.In high-rise buildings, it has strong advantages in load-bearing and space saving.At the same time, it has special advantages in secondary decoration and transformation.Structure: it is made of pure solid wood from inside to outside, which is often made of pine fir and other softwood.Ahuachapan, Whether to renovate the board.Precautions for solid wood floor installation : prevent the assembly from being too loose or too tight.Prepare the floor for hardwood installation