Defects of alloy pipe and solutions:→ under the same section load, the weight of hot-rolled H steel structure is reduced by % - % compared with the traditional structure.Santa Rosa Lima Hotel,Straight seam welding is adopted for larger diameter welded pipe, and spiral welding is mostly adopted for large diameter welded pipe; According to the top appearance of seamless steel pipe, it is divided into annular welded pipe and special-shaped (square, pitch, etc.); according to different materials and main purposes,Santa Rosa Lima HotelWhat is the inner diameter and outer diameter of the welded pipe,Santa Rosa Lima HotelTable of several inches corresponding to welded pipe,Santa Rosa Lima HotelHow much is 120 I-beam per meter, it is divided into mining anti liquid transportation welded steel pipe, etc. it is arranged from small to large according to diameter * wall thickness according to the specification, model and dimension table in the current standard.The shape of small longitudinal crack on the surface of alloy pipe is less than mm The overall width is less than mm The depth is lower than .mm.Lahad Datu,Application scope of alloy pipeI-beam has wide flange, thin web, many specifications and flexible use. It can save metal by % ~ % when used in various truss structures. Because the inner and outer sides of the flange are parallel and the edge end is at right angles, it is easy to assemble and combine into various components, which can save about % of the welding and riveting workload, greatly accelerate the construction speed of the project and shorten the construction period.The utility model has the advantages that the axial force of the roll is small, the axial movement is small, and the working slope is not required,

The small length of repair welding is mm; The raw material shall not exceed mm after grinding by welding edge.Steel pipes can be classified by their models:Its heat sealing effect is remarkable. It can be directly buried immediately, which can not only save resources, but also reduce consumption, not occupy the natural environment, but also purify the environment. The transportation of gas can meet the requirements of long-distance transportation, prevent actual operation and maintenance, meet the requirements of thermal insulation and cold protection, reduce heating equipment, unique and convenient installation, and reduce the construction cycle time of the project. On the whole, it is more convenient to use. It can also be used for the transportation of floor heating and hot springs.High quality and low price,I-beam is widely usedAlloy pipe can be divided into round steel pipe and special-shaped steel according to different cross-sectional area. Because the circular area is large on the premise of the same side length, a large amount of liquid can be transported with an annular tube. In addition, when the circular cross section bears the internal or external axial working pressure, the bearing force is more symmetrical. Therefore, most seamless steel pipes are round steel pipes.Because the section size of ordinary I-beam and light I-beam is relatively large and narrow, the moment of inertia of the two main shafts on the section is quite different, which limits its application range. I-beam shall be selected according to the requirements of design drawings. In the structural design, the use of I-beam should be reasonably selected according to the mechanical properties, chemical properties weldability and structural size of I-beam.

Alloy pipe can be divided into round steel pipe and special-shaped steel according to different cross-sectional area. Because the circular area is large on the premise of the same side length, a large amount of liquid can be transported with an annular tube. In addition, when the circular cross section bears the internal or external axial working pressure the bearing force is more symmetrical. Therefore, most seamless steel pipes are round steel pipes.Create brilliance, Cold extrusion. This kind of processing method is more purposeful. Before the preparation of steel processing and extrusion molding, when the extrusion molding is used for mm diameter pipe fittings, the investment of machinery and equipment is less, so the raw material consumption is also very small, and the technology is relatively perfect. Once the tube size is increased, the cold extrusion method must have large cargo capacity and high-power machinery and equipment. Therefore, the automatic control system will be upgraded. In order to ensure the welding quality of pipes, welders shall be trained, tested and qualified. In addition to the basic theory, the welder should consider the operation skills. The pipe welding process may include several postures of overhead welding, vertical welding and overhead welding (when the pipe cannot rotate). The size of current should be selected to take into account the formation of vertical welding and overhead welding (some pipes are not very large and the current cannot be adjusted in the middle of one formation). In the process, It can swing properly, and the forming shall be well combined with the necessary swing.Welded steel pipes need to be processed through various processes before application. The heat treatment of welded steel pipes is a very important link in the processing of welded steel pipes. Hot working is a metal hot working process in which metal materials are heated, insulated and cooled in a certain medium, and their metal properties are controlled by changing the metallographic structure on the surface or inside of the material. During the heating and cooling process of structural welded steel pipe workpiece, due to the inconsistency of cooling speed and time between the surface and the core, the temperature difference will be formed which will lead to uneven volume expansion and contraction and produce stress, that is, thermal stress.Santa Rosa Lima Hotel,Mixed Scabs are distributed periodically, and the situation after casting and rolling is significant through edge flame peeling crack inspection or billet scratch flame removal.Some applications of I-beam:The sodium cyanide passivation treatment of alloy pipe can be divided into four categories. Before passivation treatment, the surface of alloy pipe shall be clear of oil stains, pickled and passivated. Passivation treatment can be carried out only after the surface is cleaned, and the workpiece of alloy pipe products can be infiltrated into aqueous solution. The passivation treatment of the alloy tube in sodium cyanide transforms the surface layer into a very thin passivation treatment film, and the reproducibility of the solution is good.