Wear resistance, wear resistance grade t. High elasticity and super impact resistance.Pengpai stone plastic floor has soft texture so it has good elasticity. It has good elasticity recovery under the impact of heavy objects. Its foot feeling is comfortable, which is called 'soft gold of ground materials'.Even if you fall down,BoddenTownHow much is laminate floor per square meter, it is not easy to get hurt. Installing stone plastic floors at home can protect the elderly and children.BoddenTown,Convenient installation and operation: the installation of solid wood composite floor is the same as that of laminate floor. It does not strike the ground keel. It only needs the ground leveling, and can also improve the building height.The third is color.Some customers are very strict about the color of the floor and must maintain the same color difference.But this provision is unscientific.Because the wood is affected by the sun, raw material parts growth and development parts and lower sawing points, it will inevitably cause inconsistent color difference.Bilicenii Vechi,The first is cleaning to remove oil stains or dust;The second is leveling. The convex part shall be shoveled and polished. The concave part can be made into paste with glue and cement at the weight ratio of :, leveled with a spatula, and then leveled with sandpaper after drying.After the ground is flat, clean and dry, it can be glued and paved.Gluing is the last process before paving, and the tool shall be a toothed rubber scraper.During gluing, glue shall be applied on the ground according to the size of the floor paint cloth, and one piece shall be paved in this order.A width of cm shall be reserved at the joint of the floor paint cloth. No glue shall be applied first, so that the joint can be treated finally.When the glue coated on the ground feels sticky by hand, it can be paved. When pasting, pay attention to aligning the sidelines, and use a long handle floor brush to blow out and compact.The joints are generally spliced by overlapping cutting and the overlapping width is about cm.Align the long steel ruler with the center of the overlap, cut with a cutter along the ruler, then remove the cut edge strips (note that there should be two edge strips, don&#;t forget to take out the lower one), apply an appropriate amount of glue to the joint with a paint brush, and then close and compact the joint with a pressing roller.The residual glue extruded at the joint shall be wiped clean to avoid affecting the appearance.Then apply a thin layer of joint liquid along the joint.Finally, check whether there are bubbles and whether they are flat.If there are bubbles, use a syringe to insert and suck out the air, and then compact it.Finally, use washing powder to remove the residual glue marks on the lacquer cloth. If they cannot be removed, they can be wiped with alcohol.In this way, the whole process will be completed.Due to the improvement of the living standards of Chinese residents, the grade of interior decoration is also rising, and the decoration materials are increasingly developing towards the fixed decoration direction of elegance, high profile, long service life and good effect.As for the ground, the service life of paint, carpet or ordinary floor leather and floor brick is not as long as that of ground lacquer cloth.The crystal surface is basically flat. It&#;s easy to take care of and clean up. Ultra light and ultra-thin

Advantages: high wear resistance, good reliability, moisture-proof, good management methods, rich and colorful color and pattern design types, and large price range.From the surface of the floor, the solid wood floor can be polished and painted again even if the surface is damaged because it is the whole piece of wood.Tianhe floor adopts Jianfu paint, which is wear-resistant, scratch resistant, excellent surface performance, and greatly prolongs the service life of the floor.However, multilayer boards and laminates cannot do this. If there is a problem with the surface, the whole floor will be completely abandoned.If the new floor is to be sent to a room equipped with large equipment, it may need to be rewired before moving.Make sure to contact an electrician before installing the floor.If the equipment needs to be moved, there is no need to worry that the heavy machinery will scratch it before installing the old floor.Keep tarpaulin and tape.A complete range of products,For long-term indoor use, high and medium grade products should be selected, and products produced by well-known brands and regular enterprises should be purchased as far as possible. Such products have sufficient thickness and good interlayer adhesion, and are not easy to layer and curl, especially foamed leather, which gives people an elegant feeling. If you want to use them for short-term use or one-time cover, you can choose low-grade products, because the price of low-grade products is low, there are many prices to choose from, but many of these products are processed with waste materials, with poor flexibility,BoddenTownImported laminate brand, generally thin thickness and large shrinkage coefficient. Laminate flooring is generally composed of four layers of composite materials, namely wear-resistant layer, decorative layer, high-density substrate layer and balance (moisture proof)Laminate floor is also called impregnated paper laminated wood floor and laminate floor. Qualified laminate floor is made of one or more layers of special impregnated thermosetting amino resin.Fourth, reliable flooring companies and well-known brand operators with overall strength have done very well in after-sales maintenance service.We all know the truth of three-point floor and seven point installation, so we must choose a professional installation teacher to install it.What kind of floor is good for bedroom design?The wear resistance of laminate floor mainly depends on the content of aluminum oxide in the surface layer, while in public places the number of wear-resistant revolutions is usually more than revolutions, it is usually more than revolutions. You can buy it on demand.

There is nothing in the world that is not hot, and so is the floor.No matter whether the SPC floor has shrinkage joints or not, as long as the shrinkage joint size is calculated according to the shrinkage performance of the floor, site environment, room size, winter and summer temperature, even the floor with poor robustness can minimize the problem rate and reduce unnecessary losses.The development trend of China&#;s solid wood flooring industry chain is from big to strong. On the other hand, it also depends on the training of various difficulties and events in the markets of all countries in the world.The tsunami caused fluctuations in the wood market, followed by the rise in the price of solid wood flooring in , and more fierce market competition. In particular, the announcement of the current policy of levying % income tax on the Chinese market of solid wood flooring in also pushed the solid wood flooring company to the vortex of public opinion.Therefore, China&#;s solid wood flooring field should re plan the overall goal of development prospects, adjust the development strategic concept,BoddenTownSPC floor pictures, actively build a strong brand and promote the physical and mental health development trend of solid wood flooring.Promotion, blocks, plates or coils can be selected.Floor lacquer cloth, also known as floor leather (not PVC plastic floor), is a kind of paving material. It belongs to rubber plastic products. It is one of the indispensable floor materials for the decoration of power distribution room, substation and communication room. The thickness is -mm. Other thicknesses can be made according to the needs of users. The wear-resistant layer is generally less than or equal to .mm.The choice of lacquer cloth products shall be selected according to the suitability of the site.For example, the size of the product is determined according to the space of the house and the size of the place of use.At the same time, pay attention to the different places of use, and the selected patterns should also be different.For example in places that need to be kept clean, you can&#;t choose products with convex effect;In solemn places, it is not suitable to choose products with bright colors and messy.The width of coiled floor paint cloth is mm, mm and mm;The total thickness (referring to the base material, intermediate layer and surface wear-resistant layer) is divided into mm and mm;The length of each roll of floor leather is m and m.Other specifications and dimensions can be determined by the supplier and the buyer through negotiation.Because of the requirements of production, each roll of floor paint cloth is divided into several sections (the patterns between each two sections are misplaced), so the length of the small section of a roll of floor paint cloth with sections shall be indicated and the length of the roll of floor paint cloth shall be increased by at least cm (i.e. not less than two complete patterns).Generally, there can only be one section for high-quality products, and the number of sections of each volume of first-class products and qualified products shall not exceed ;The length of each section of first-class products shall not be less than m, and the length of each section of qualified products shall not be less than m.When inspecting the appearance quality of floor paint cloth leather, it should be visually inspected obliquely under the scattered sunlight or fluorescent lamp with the illuminance of ( ± LX and LM away from the tested sample.First, observe whether there are cracks, fractures and delaminations on the surface of the floor leather. If so, it can be determined that the floor leather is unqualified.The second step is to observe whether there are wrinkle marks, bubble pollution points and pattern deformation. What cannot be observed are excellent products and first-class products;If it is slight but not obvious, it is deemed as qualified. Go back to the third step to observe whether there are missing patterns on the surface of the floor leather and whether there are defects of the transparent wear-resistant film on the surface. If there is no, it is the first-class product and the first-class product. If there is slight missing or lack of film, otherwise it is the unqualified product.Finally, carefully check whether there is deviation during multi-color overprint on the surface, whether there are color differences in different parts, whether the superior products are uneven, and if there are the above two defects, and the products with obvious above defects but do not affect the overall beauty are determined as qualified products.Finally, based on the above judgment, the appearance quality of ground lacquer cloth is determined.The plastic coil floor paint cloth shall roll the wear-resistant layer outward on the pipe core and shall be externally packaged.The product name, manufacturer name, grade, batch number, quality and length shall be marked at the obvious place of each package.In addition to the above three items that can be directly judged by the senses, attention should also be paid to the physical properties when purchasing floor leather to ensure its service life.BoddenTown,Common cost methods for solid wood flooring are as follows:Third it is flame retardant, but it can&#;t be burned.The second: I can&#;t tell the taste. The domestic price of this floor is more than yuan;