High cost performanceMute, that is, add cork cushion or other cushion similar to cork on the back of the floor.After using the cork floor mat, the noise of stepping on the floor can be reduced by more than dB (quoted from the data of the cork floor mat factory), which can increase the foot feeling, sound absorption and sound insulation.This plays a positive role in improving the comfort of laminate flooring.It is also a direction for the future development of laminate flooring.Helchteren,The high-grade laminate flooring has high texture definition and more realistic designs and colors. Even the wood grain scabs and texture details are comparable to those of real wood. Moreover,HelchterenHow is the first floor damp proof, the printing of low-quality wood flooring is stiff,HelchterenHow to stick the floor leather, rough and blurred. Users can touch the surface of wood flooring with their hands. Whether it is wood grain or tactile laminate flooring, it overturns the plane effect of ordinary flooring and has a stronger three-dimensional sense. Green environmental protectionGuatemala, Do not scrape or scratch the floor surface with sharp tools.Keep in mind the old adage that cheap goods are not good goods. Products sold at very low prices often have problems. There is an unfathomable trap behind cheap goods.In the face of fierce market competition, everyone wants to attract consumers, but regular manufacturers who pay attention to quality can&#;t make a jump price. Free formaldehyde emission

Prepare the floor for hardwood installation The composite floor has stable quality and is not easy to be damaged.The flame retardant grade is B and the indoor formaldehyde is higher than the national standard.Quality risk,Then look at the qualityFinally, look at the priceStructure: solid wood surface material, basic manual.

Test: for the ground lacquer cloth with thin thickness, you can tear it by hand. If it can be easily torn off, the tear strength of such ground lacquer cloth can not meet the requirements. After gently rolling up and pressing down, if it can not be restored to the original state and leave an indentation, such a product has poor softness.If the layers can be torn by hand, it indicates that the product layers are not well combined, and stratification will soon occur in future use.Plastic floor paint cloth has the advantages of light weight, elasticity good mechanical strength, good foot feeling strength, comfortable foot feeling, wear resistance, pollution resistance, heat insulation, sound insulation, small water absorption, good insulation, self extinguishing, easy cleaning, simple construction, convenient maintenance and low price. In a large number of civil buildings and public places, it has high requirements for cleanlinessIt is widely used in the laboratory.Plastic floor paint cloth belongs to soft floor. It is a floor coil produced by coating or calendering on sheet continuous substrate with polyvinyl chloride resin as the main raw material and appropriate additives.The length of each roll of plastic floor paint cloth is m ~ m, the width is mm ~ mm ~ mm, and the total thickness is mm (machine room) ~ mm (plant and public buildings)For long-term indoor use, high and medium grade products should be selected, and products produced by well-known brands and regular enterprises should be purchased as far as possible. Such products have sufficient thickness and good interlayer adhesion, especially foamed leather, which gives people a comfortable and elegant feeling. If you want to use them for a short time or one-time cover, you can choose low-grade products, because low-grade productsThe price is low and there are many prices to choose from, but many of these products are processed with waste materials, with poor flexibility, generally thin thickness and large shrinkage coefficient. When checking the appearance quality of rubber plastic floor paint cloth, it should be under scattered sunlight or fluorescent lamp, and the illumination should be ( ± LX LM from the tested sample, conduct oblique visual inspection. First, observe whether there are cracks, fractures and delaminations on the surface of the local lacquer cloth. If there are, it can be judged that the local lacquer cloth is unqualified. The second step is to observe whether there are wrinkle marks, it is the first-class product and the first-class product. If there is a slight missing print or lack of film, it is the qualified product, carefully check whether there is deviation in the multi-color overprint on the surface, whether there is color difference in different parts, if the top-class product is uneven, if there are the above two defects, but if there is no obvious, it is the first-class productProducts that obviously have the above defects but do not affect the overall beauty are judged as qualified products. Finally, the appearance quality of ground lacquer cloth is determined based on the above judgment. When selecting ground lacquer cloth, first smell whether it has pungent smell. There will be a slight smell after the good coil is opened, and the smell of inferior products is stronger; secondly, calculate the use area, and the same room should be selectedCoiled materials with the same batch number, pattern and thickness. When purchasing, carefully observe the appearance quality, open a roll of ground lacquer cloth, separate the ends for a few meters, observe the surface layer of the sample, the surface layer is thick the wear-resistant layer is thick, and the service time is long, and then observe whether there are cracks, fractures, wrinkles bubbles and large defects; whether the cross section is layered and cracked; whether the pattern is open, missing lack of film and overprint deviationDefects such as color difference, color difference and pollution.Affordable price, Wear resistance, wear resistance Grade TDifferent colored floors can create different styles of popular furniture, high-grade, calm, classical and unique furniture charm.Exquisite life starts from decoration. If you want to have a family environment with both appearance and quality, you need a combination of styles. The decoration style has a great relationship with the choice of floor color.Therefore, to create such high-quality and textured home decoration, we must not damage the floor.Exquisite life starts from decoration. If you want to have a family environment with both appearance and quality, you need a combination of styles. The decoration style has a great relationship with the choice of floor color.Therefore, to create such high-quality and textured home decoration, we must not damage the floor.In short, floor leather is a layer of synthetic plastic decorative products. In addition to many advantages such as wear resistance, pollution resistance, corrosion resistance, moisture resistance, small water absorption, simple construction, convenient maintenance and low price, it also adds the advantages of comfortable foot feeling, warm in winter and cool in summer of wood floor, narrowing the gap between wood floor and wood floor. No wonder floor leather will be so popular.If you are also worried about the shortcomings of wood flooring, you might as well consider floor leather materials.Plastic floor leather has the advantages of light weight, elasticity, good mechanical strength, good foot feeling strength, foot feeling, wear resistance, pollution resistance,HelchterenIllustration of wood floor installation method, corrosion resistance, heat insulation, sound insulation, moisture resistance, self extinguishing good insulation, easy cleaning, simple construction, convenient maintenance and low price. In a large number of civil buildings and public places, factories with high requirements for cleanlinessIt is widely used in the laboratory.Plastic floor leather belongs to soft floor. It is a floor roll produced by coating or calendering on sheet continuous substrate with polyvinyl chloride resin as the main raw material and appropriate additives.The length of each roll of plastic floor leather is m ~ m, the width is mm ~ mm, and the total thickness is mm (household) ~ mm (public building).Helchteren,Small blisters can not be repaired after damage, and the upper foot is weak.The surface is treated with special technology, without air holes and water impermeability. It is no problem to shop in the areas where toilets and kitchens communicate with water.No, it will not be like the ordinary wooden floor. Once it bubbles, it will deform and bubble, or it will become moldy due to high humidity.Sixth, his specifications and dimensions are also related to his total price.