A

　　There are seven strength levels: A, A, A, A, A, and A　　If the purchasing unit needs other specifications, they can negotiate with the production factory to determine.Shen County,　　Aerated blocks have been widely used in load-bearing or non load-bearing structures and pipeline insulation in industrial and civil buildings in China　　 The following standards contain provisions that constitute the provisions of this standard by reference in this standard. At the time of publication of this standard, all versions shown are valid. All standards will be revised, and all parties using this standard should explore the possibility of using the latest versions of the following standards.Mongolia,　　Control standard for radioactive substances in building materials mixed with industrial waste - Determination of steady-state thermal resistance and related characteristics of insulation materials - Protective hot plate method for testing the performance of aerated concrete - General rules - Test methods for volumetric density, moisture content,Shen CountyAerated block, and water absorption of aerated concrete - Mechanical properties of aerated concrete - Test methods for drying shrinkage of aerated concrete - Test methods for frost resistance of aerated concrete ( - Terminology of bricks and blocks Product classification Specifications: The specifications and dimensions of the blocks are shown in Table 　　There are six levels of volumetric density: B, B, B, B, and B　　as the main raw materials, regulator, bubble stabilizer added, mixing, pouring static stopping, cutting, and high-pressure steam curing. The unit volume weight of autoclaved aerated concrete blocks is one-third of that of clay bricks, and the insulation performance is - times that of clay bricks,Shen Countyaerated block brick, The sound insulation performance is twice that of clay bricks, the impermeability performance is more than twice that of clay bricks, and the fire resistance performance is - times that of reinforced concrete. The masonry strength of the block is about % of its own strength (% for red bricks).

　　Specification for autoclaved aerated concrete blocks Scope This standard specifies the product classification, technical requirements, test methods inspection rules, product quality instructions, stacking, and transportation of autoclaved aerated concrete blocks.　　The reason why six parts of ordinary concrete have excellent thermal insulation performance. Aeration block is a lightweight and porous material　　There are seven strength levels: A, A, A, A, A, A, and Atotal cost,　　 Blocks are divided into three levels based on dimensional deviation, volumetric density, and compressive strength: excellent product (A),Shen Countyautoclaved aerated concrete block, first-class product (B), qualified product (C).　　 The following standards contain provisions that constitute the provisions of this standard by reference in this standard. At the time of publication of this standard, all versions shown are valid. All standards will be revised, and all parties using this standard should explore the possibility of using the latest versions of the following standards.　　There are six levels of volumetric density: B, B, B, B, B, and B

　　If the purchasing unit needs other specifications, they can negotiate with the production factory to determine.Quality documents,　　If the purchasing unit needs other specifications, they can negotiate with the production factory to determine.　　Condensing materials. As the main raw material. This aerated concrete block has the advantages of insulation, moisture resistance, and lightweight.　　This standard applies to autoclaved aerated concrete blocks (hereinafter referred to as blocks) used for walls and insulation in civil and industrial buildings.Shen County,　　There are seven strength levels: A, A, A, A, A, A, and A　　 The following standards contain provisions that constitute the provisions of this standard by reference in this standard. At the time of publication of this standard, all versions shown are valid. All standards will be revised, and all parties using this standard should explore the possibility of using the latest versions of the following standards.　　 Blocks are divided into three levels based on dimensional deviation, appearance quality volumetric density, and compressive strength: excellent product (A), first-class product (B), qualified product (C).