What are the commonly used materials for blister? What are the characteristics of each?Special attention should be paid to the food packaging of vacuum pumping. Vacuum pumping can not block the growth of bacteria in the food, but can only slow down the microorganisms that need oxygen. If you want to keep the food from spoilage and prolong the shelf life, you need to treat the food, such as high temperature, ultraviolet light irradiation and so on, Then vacuum the food packaging bag using the sterilizer, which greatly prolongs the shelf life.Jobabo,Definition of Danny number (fixed length) of folded bag fabric yarn in this section: take the yarn with a length of meters. If it weighs g, g is called D, and so on. The higher the Danny number, the thicker the yarn and the thicker the cloth (usually used for long fiber yarn)Composite non-woven packaging color printing -- an integral non-woven packaging color printing composed of an outer non-woven packaging color printing and an inner container.Santo-Tomas,Passenger trains passenger ships, buses, aircraft, stations, airports and scenic spots shall not provide passengers and tourists with ultra-thin non-woven shopping bags (non-woven packaging color printing bags). The competent departments of railways, communications, civil aviation and tourism shall earnestly perform their duties. Green non-woven packaging color printing green non-woven packaging color printing design is a non-woven packaging color printing design process with environment and resources as the core concept. Specifically, it refers to the selection of appropriate green non-woven packaging color printing materials and the use of green process means to carry out structural modeling and beautification and decoration design for non-woven packaging color printing commodities.Combined non-woven packaging color printing -- more than one inner non-woven packaging color printing is placed in one outer non-woven packaging color printing (can be separated) &Le; kg. For example, the non-woven can is placed in the wooden box, and the external non-woven packaging color printing - the external protection part of the external non-woven packaging color printing and the combined non-woven packaging color printing and its adsorption and liner materials are reused non-woven packaging color printing - the non-woven packaging color printing of filling the same items, the performance indexes before each use must meet the standards. Repair the non-woven packaging color printing - replace the non-woven printing of some accessories Textile packaging color printing. Such as barrel cover, gasket recycled non-woven packaging color printing - the form has changedInner container -- non-woven packaging color printing of direct and materials; container requiring external non-woven packaging color printing. (composite non-woven packaging color printing)

What is flocking and blistering?With the rapid development of economy, the improvement of living standards and the increase of expenses caused by population aging, the strengthening of new product development, the acceleration of the pace of and the expansion of urban residents&#; insurance, the industry will continue to maintain the momentum of rapid growth. In addition the quality of packaging materials and non-woven packaging color printing varieties are significantly lower than the international level. Developed, non-woven packaging color printing accounts for % of the product value, but less than %. The next few years will be a period of rapid development of non-woven packaging color printing industry.Material elements material elements include basic materials (paper materials, non-woven materials, glass materials, metal materials, ceramic materials, bamboo and wood materials, leather materials and other composite materials) and auxiliary materials (adhesives, coatings, etc.), which are the material basis for the realization of the great s (protection, convenience and) of non-woven packaging color printing, It is directly related to the overall and economic cost of non-woven packaging color printing, production and processing mode, and the recycling and treatment of non-woven packaging color printing waste.OK or not?,In the consumer electronics industry, the BB value of North American semiconductor equipment manufacturers as an important current industry indicator, fell for the eighth consecutive month in August. In terms of terminal products, the output growth of other consumer electronics products continued to slow down in August. This shows that the overall demand of the market is still in the stage of slow recovery.Pepper, fennel, fennel, pepper, longan, peanut, tangerine peel, raisin, etc. these dry products belong to food packaging. Due to the removal of moisture, the shelf life is greatly extended. For these dry products, printed by multi-color gravure printing machine, and the printing process is internal printing process, After the printing is completed, two layers of films or layers of films are combined. I am engaged in all kinds of non-woven bags cotton bags, canvas bags, thermal insulation bags and hand decoration Bags & nbsp; And other materials, integrity management, welcome to call! Then make bags after ripening. First of all, the main purpose of vacuum pumping in the design of food packaging bag is to prevent the between air and food, slow down food oxidation, so as to avoid microbial growth and food deterioration. Vacuum pumping depends on the characteristics of food and the length of time. Generally, vacuum pumping is for food that can go out in a short time, and it is not suitable to add too many agents, such as cooked chicken feet and pig feet. Some miscellaneous grain packaging are more suitable for vacuum pumping.Side sealed bags, of which side sealed bags are seen in many food and snack packaging bags. The whole processing process of this kind of packaging bag needs about steps, including printing, compounding, ripening, slitting, bag making and other processes. More complex side sealed and side sealed bags stand stably and can be placed on the shelf for a long time, The side seal needs a printing surface. The side seal zipper bag is equipped with a reusable zipper, so consumers can reopen and close the zipper. The box is unmatched, unique in appearance, and ensure the internal sterile environment within a fixed time. It is carried out by means of high-temperature steam, light irradiation and radiation. For infusion sets used for secondary use, the original materials of sterile syringes are generally paper plastic materials. This paper plastic bag is disinfected with EO epoxy B. A product has to be circulated for many times before it can reach the hands of consumers from the producer. During this period, it needs to go through many links such as loading and unloading, transportation, handling, display and so on. In these processes, such as collision, light line, gas and other factors, which will threaten the safety of the commodity, Therefore, the packaging must ensure that the products will not be damaged by external factors and reach consumers safely. This requires designers to pay attention to the modeling,JobaboPortable nonwoven bag, structure, materials and other aspects of packaging, so as to improve the comprehensive protection of products. For example, the packaging of some eggs is designed to take into account

The key to the development of non-woven stabilization technology is the preparation and application of new antioxidants, UV stabilizers and base capture agents. Professional non-woven bag, cotton bag, canvas bag, thermal insulation bag, hand decoration bag & nbsp; And other types of products are complete, selling well at home and abroad, and the equipment has a long service life! Products lead the industry of wire products. Welcome to inquire. Refill non-woven containers for daily chemicals, trays or turnover boxes for food, non-woven stabilization technology and high-quality non-woven products, so as to improve its reuse or recycling value.Where to sell API,In terms of food and beverage industry, affected by the rising demand for beverage products in the coming summer, the growth rate of retail sales of Enterprises above Designated Size in August was faster than that in July, and the cumulative retail sales of food industry and beverage industry increased by % and % year-on-year respectively. Since enterprises above designated size are obviously superior to other compes in terms of and channel construction, we expect that with the upgrading of residents&#; consumption and the improvement of residents&#; awareness, the growth rate of production and sales of Enterprises above Designated Size will continue to remain high.In the process of forming and using many non-woven fabrics, due to the action of heat, light or oxygen, many phenomena such as degradation oxidative chain breaking and cross-linking occur prematurely, stabilizers are usually added to their components. Common stabilizers include hard ester acid salt resulting in the deterioration of material properties. In order to stabilize the quality of non-woven products and prolong their service life, lead white, epoxide, etc. [] Other additives in non-woven fabric processing, in order to demould and make the products bright and clean, agents are often needed. The commonly used agents are fatty acids and their salts. In order to make non-woven fabric products such as non-woven fabric floor mat and non-woven fabric floor mat antistatic, antistatic agent is added to improve the surface conductivity and make the charged non-woven fabric discharge rapidly.Natural non-woven packaging color printing inspired by the shape of natural objects, non-woven packaging color printing is often vivid and interesting. These natural objects have many forms, such as pods, oranges, honeycombs, animal fur, plant branches and leaves, etc.Jobabo,The determinants of industry trends are the factors of new product technology demand. With the improvement of human civilization new products continue to be popularized. Some new products involve new fields that have not been involved before. For example, microelectronics, superconductors, biological gene products, nano products, etc. These new products also pose new challenges to the non-woven packaging color printing design itself. How to protect and retain these products, how to make them enter the smooth field safely, and how to succeed in trade. These new topics promote the continuous renewal and improvement of non-woven packaging color printing structure, new materials and visual communication, so as to meet the needs of new products and the times.Side sealed bags, of which side sealed bags are seen in many food and snack packaging bags. The whole processing process of this kind of packaging bag needs about steps, including printing, compounding, ripening, slitting, bag making and other processes. More complex side sealed and side sealed bags stand stably and can be placed on the shelf for a long time, The side seal needs a printing surface. The side seal zipper bag is equipped with a reusable zipper, so consumers can reopen and close the zipper. The box is unmatched, unique in appearance, beware of counterfeiting, and easy for consumers to identify. The equipment is a special commodity. The packaging materials must be operated to block the possibility of microbial infection, and ensure the internal sterile environment within a fixed time. It is carried out by means of high-temperature steam, light irradiation and radiation. For infusion sets used for secondary use, the original materials of sterile syringes are generally paper plastic materials. This paper plastic bag is disinfected with EO epoxy B. A product has to be circulated for many times before it can reach the hands of consumers from the producer. During this period, it needs to go through many links such as loading and unloading, handling, there will be many qualitative external factors, such as collision, shock light line, gas and other factors, which will threaten the safety of the commodity,JobaboSailless cloth bag, Therefore, the packaging must ensure that the products will not be damaged by external factors and reach consumers safely. This requires designers to pay attention to the modeling, structure, materials and other aspects of packaging, so as to improve the comprehensive protection of products. For example, the packaging of some eggs is designed to take into accountLacquerware is often used as utensils, food utensils and ritual utensils. The decoration mainly includes color painting, carved paint and inlay.