Standard classification - classification: national standard GB industry standard Yb local standard enterprise standard qcb- classification: product standard packaging standard basic standard - standard level (divided into three levels): y level: international advanced level I level: international general level H level: domestic advanced level - national standard: stainless steel bar (level I) gb- stainless welding disc Park (level H)As long as the steel type is selected correctly and maintained properly, stainless steel will not produce corrosion, pitting, corrosion or wear. Stainless steel is also one of the high-strength materials in metal materials for construction. Because stainless steel has good corrosion resistance, it can ensure that the structural components can maintain the integrity of engineering design. Chromium containing stainless steel also integrates mechanical strength and high extensibility and is easy to wear The processing and manufacturing of parts can be fullCartago,When the stress exceeds the limit, even if the stress no longer increases, the steel or sample continues to have obvious plastic deformation. This phenomenon is called yield. Professional stainless steel plate, stainless steel coil stainless steel belt and stainless steel pipe ensure quality, service and quality. Your satisfaction is our pursuit! Welcome to inquire The small stress value when yielding phenomenon occurs is the yield point. Let PS be the external force at the yield point s and fo be the cross-sectional area of the sample, then the yield point & sigma; s = PS / fo (MPA), MPa is called MPa, which is equal to n (Newton) / mm (MPA = pa, PA: Pascal = n / m.Some reasons for product composition ratio: in order to reduce the production cost reduce the proportion content of some important elements such as chromium and nickel, and increase the content of other elements such as carbon. This production phenomenon that the composition ratio is not strictly in accordance with the product model and product characteristics not only greatly reduces the product quality, for example, when the chromium content of stainless steel pipe is insufficient, it not only affects the production The corrosion resistance and formability of products have potential product quality and safety hazards when they are used in chemical, equipment and production industries. At the same time, they also affect the appearance and oxidation resistance of products.Piacenza,Chloride ions exist in the service environment. Chloride ions exist widely, such as salt, sweat, sea water, sea breeze, soil, floating rust of iron foam and so on. Stainless steel corrodes rapidly in the presence of chloride ions, even more than ordinary low carbon steel. Therefore, there are requirements for the service environment of stainless steel, and it is necessary to remove dust frequently and keep it clean and dry. (in this way, we can give him a & ldquo; improper use & rdquo;) there is an example in the United States: an enterprise uses an oak container to contain a solution containing chloride ions. The container has been used for nearly years. The ninetieth generation of the last century plans to replace it. Because the oak material is not modern enough, the container leaks due to corrosion days after it is replaced with stainless steel.Proper heat treatment process can prevent intergranular corrosion and obtain excellent corrosion resistance.And stainless steel are molybdenum containing stainless steels. The molybdenum content of stainless steel is slightly higher than that of stainless steel. Due to the molybdenum content in stainless steel, the overall performance of this steel is better than that of and stainless steel. Under high temperature conditions, when the concentration is lower than % and higher than %, stainless steel has a wide range of applications. Stainless steel also has good chloride corrosion resistance, so it is usually used in marine environment.

In the building water supply pipe system, various new plastic pipes and composite pipes have developed rapidly, but various pipes still have some deficiencies in varying degrees, which are far from fully meeting the needs of water supply pipe system and the national requirements for drinking water and related water quality. Therefore, relevant experts: building water supply pipes will eventually return to the era of metal pipes. According to foreign application experience, stainless steel pipe is recognized as one of the pipes with good comprehensive performance in metal pipe.(II) The price of steel has been running at a low level. From June to June , the overall performance of the domestic steel market was depressed. With the substantial release of crude steel production capacity, the market supply and demand fell into an imbalance, and the steel price entered the downward channel, which has been weak for more than four months. As of June , , the steel price index fell to . points, lower than the first points. The prices of eight steel varieties mainly counted by the iron and steel industry association were higher than at the beginning of the year different degrees In the building water supply pipe system, due to the end of the glorious history of galvanized steel pipe, various new plastic pipes and composite pipes have developed rapidly, but various pipes still have some deficiencies in varying degrees, which are far from fully meeting the needs of water supply pipe system and the national requirements for drinking water and related water quality. Therefore, stainless steel pipe is recognized as one of the pipes with good comprehensive performance in metal pipe.High valueProduction mode stainless steel pipe can be divided into seamless pipe and welded pipe according to the production mode. Seamless steel pipe can be divided into hot-rolled pipe, cold-rolled pipe, cold drawn pipe and pipe. Cold drawing and cold rolling are the secondary processing of steel pipe; Welded pipe is divided into straight seam welded pipe and spiral welded pipe.Vickers hardness stainless steel pipe Vickers hardness test is also an indentation test, which can be used to determine the hardness of very thin metal materials and surface layers. It has the main advantages of Brinell and Rockwell methods and overcomes their basic disadvantages, but it is not as simple as Rockwell method. Vickers method is rarely used in steel pipe standards.In order to ensure the appearance quality of continuous casting slab, the vibration marks formed on the surface of continuous casting slab due to the vibration of mold shall be; Electromagnetic stirring must be used in continuous casting of ferritic stainless steel pipe fittings.

Stress corrosion cracking (SCC) refers to the cracking caused by the combined action of stress corrosion stress (mainly tensile stress) and corrosion of austenitic stainless steel Austenitic stainless steel is prone to stress corrosion in corrosive media containing chloride ions. When the Ni content reaches % - %, stainless steel coil, stainless steel belt and stainless steel pipe. Welcome to consult. The stress corrosion tendency of austenitic stainless steel is very large. Continue to increase the Ni content to ~ %, and the stress corrosion tendency gradually decreases until it disappears.Honesty and mutual benefit,Human factors are also one of the causes of product oxidation that some consumers often encounter when using stainless steel products. Some consumers operate improperly in product use and maintenance,CartagoHigh temperature resistance of stainless steel hose, especially some stainless steel pipe products used in food and chemical equipment industry. For the artificially generated oxidation of steel products, they should have correct product use knowledge and Reasonable and effective maintenance shall be carried out regularly to reduce oxidation caused by improper use.h chemical composition carbon C: Manganese Mn: silicon Si: chromium Cr: nickel Ni: phosphorus P: sulfur s: niobium NB: h stainless steel Name: austenitic stainless steel standard: aisastm model: huns No.: Note: a single value is a high value unless otherwise indicated; when used in some pipe making processes,Cartagoaustenitic stainless steel pipe , the nickel content of some models of austenitic stainless steel must be slightly higher than that shown in the table; optional High TA content is .%; high content is .%; high content is the basic characteristics of stainless steel, with high temperature strength and high temperature plasticity, excellent oxidation resistance and corrosion resistance, good structural stability, uniform chemical composition, good processing performance and welding performance, high dimensional accuracy and surface quality. causes of rust when brown spots appear on the surface of stainless steel They were greatly surprised: & rdquo; stainless steel will not rust. Rust is not stainless steel. There may be something wrong with the steel quality. & rdquo; in fact, this is a one-sided wrong view of the lack of understanding of stainless steel. Stainless steel will also rust under certain conditionsStress relief treatment. Stress relief treatment is a heat treatment process to eliminate the residual stress of steel after cold working or welding. It is generally heated to ~ ℃ for tempering. For steels without stabilizing elements Ti and Nb, the heating temperature shall not exceed ℃, so as to avoid intergranular corrosion caused by chromium carbide precipitation. For cold worked and welded parts of ultra-low carbon and stainless steel containing Ti and Nb they need to be heated at ~ ℃ and then cooled slowly to eliminate stress (the upper limit temperature is taken for eliminating welding stress), which can reduce the tendency of intergranular corrosion and improve the stress corrosion resistance of steel.Cartago,Using CrO and hsoho as the main components and adding an appropriate amount of mnso.ho coloring solution the chemical coloring of stainless steel industrial pipe was carried out. The effects of pretreatment process, mass concentration and coloring time on the color film of stainless steel industrial pipe were discussed. Through a large number of experiments, a good formula and process range of coloring solution are obtained. With the increase of temperature and time, the film thickness increases, and the color changes are brown, blue, gold, purplish red and green. After curing and sealing treatment, the colored film of stainless steel industrial pipe has more uniform surface color, good reproducibility, and significantly improved wear resistance and corrosion resistance.Using CrO and hsoho as the main components and adding an appropriate amount of mnso.ho coloring solution, the chemical coloring of stainless steel industrial pipe was carried out. The effects of pretreatment process, coloring solution temperature, mass concentration and coloring time on the color film of stainless steel industrial pipe were discussed. Through a large number of experiments, a good formula and process range of coloring solution are obtained. With the increase of temperature and time, the film thickness increases, and the color changes are brown, blue, gold, purplish red and green. After curing and sealing treatment, the colored film of stainless steel industrial pipe has more uniform surface color, good reproducibility, and significantly improved wear resistance and corrosion resistance.The scale pretreatment of stainless steel pipe makes the scale loose, and then acid pickling is carried out for easy removal. The pretreatment can be divided into the following: alkaline salt melting treatment method. The alkaline melt contains % hydroxide and % salt. The proportion of the two in the molten salt shall be strict, so that the molten salt has strong oxidizing power, low melting point and small viscosity. Only the sodium halo shall be analyzed in the production process, and the content shall not be less than % (wt) It is treated in a salt bath furnace at ~ ℃ for minutes for ferritic stainless steel and minutes for austenitic stainless steel. Similarly, iron oxides and spinels can also be oxidized by salt to become loose ferric oxide, which is easy to be removed during acid pickling. Due to the action of high temperature, some of the formed oxides peel off and sink to the furnace bottom in the form of sediment. Alkaline salt melting pretreatment Process flow: steam degreasing → preheating ( ~ ℃, so deep well anti splash water quenching tank shall be used during water quenching. During water quenching, firstly lift the parts basket into the tank, stop above the horizontal plane close the tank cover, and then lower the parts basket into the water, Professional L stainless steel pipe, s stainless steel pipe and L stainless steel pipe are stable, safe, reliable and maintenance free. The technical level has reached the domestic level and the international advanced level of similar products until submerged.