You can take some steps to ensure a smooth and seamless installation: remove the base plate and door frame before starting.This will make it easier for your installation team to get the perfect fit.No matter what kind of floor you are currently using, thorough vacuuming will make the rest of the work easier.Ask the installer in advance whether to remove the old floor or decide by himself.If the new floor is to be sent to a room equipped with large equipment, it may need to be rewired before moving.Make sure to contact an electrician before installing the floor.If the equipment needs to be moved, there is no need to worry that the heavy machinery will scratch it before installing the old floor.Keep tarpaulin and tape.Scarborough,Fear of water and moisture: the base material of laminate floor is medium and high density board, with small relative density and large expansion coefficient. Once the reinforcing layer is filled with water after paving, if it is not wiped in time, it is easy to cause blistering and deformation due to water absorption and expansion. Its moisture resistance is not strong,ScarboroughHow to splice the floor leather, so that the heat generated in the cross section is the full volatilization of formaldehyde (formaldehyde will accelerate the release above ℃ and some irritating smell can be smelled). At this time, you can smell it. Generally, you can smell three different levels of smell:Pruzhany, Smell: whether the product has a chemical smell that irritates people. The big smell is likely to be that the limit of harmful substances exceeds the standard or the printing layer on the surface of floor leather releases toxic gas.In particular, the previous agency said that the laminate floor is a waterproof floor, which is only the surface layer. In fact, the only taboo in the application of laminate floor is small blisters.In addition, there are impact resistance, anti environmental pollution, anti sunlight, anti smoke, easy installation, easy maintenance, etc.

The water resistance is reflected by the water absorption thickness expansion index. If the index value is high the water resistance is poor, that is, only moisture-proof floor, no waterproof wooden floor.The more and more popular American idyllic floor is dirt resistant and durable. The furniture has a full sense of high grade. The rustic flavor brought by the simple texture and tone can not be copied.This floor is suitable for creating a simple and natural pastoral style. It is very classical, which can make the whole style more fashionable and full of personality. Test: for the ground lacquer cloth with thin thickness, you can tear it by hand. If it can be easily torn off, the tear strength of such ground lacquer cloth can not meet the requirements. After gently rolling up and pressing down, such a product has poor softness.If the layers can be torn by hand, it indicates that the product layers are not well combined, and stratification will soon occur in future use.Plastic floor paint cloth has the advantages of light weight elasticity, good mechanical strength, good foot feeling strength, comfortable foot feeling, wear resistance, pollution resistance, corrosion resistance, heat insulation sound insulation, moisture resistance, small water absorption, good insulation, self extinguishing, easy cleaning, simple construction, convenient maintenance and low price. In a large number of civil buildings and public places, it has high requirements for cleanlinessIt is widely used in the laboratory.Plastic floor paint cloth belongs to soft floor. It is a floor coil produced by coating or calendering on sheet continuous substrate with polyvinyl chloride resin as the main raw material and appropriate additives.The length of each roll of plastic floor paint cloth is m ~ m, the width is mm ~ mm ~ mm,ScarboroughComplete pictures of floor leather, and the total thickness is mm (machine room) ~ mm (plant and public buildings)For long-term indoor use, and products produced by well-known brands and regular enterprises should be purchased as far as possible. Such products have sufficient thickness and good interlayer adhesion, and are not easy to layer and curl, especially foamed leather, which gives people a comfortable and elegant feeling. If you want to use them for a short time or one-time cover, you can choose low-grade products, because low-grade productsThe price is low and there are many prices to choose from, but many of these products are processed with waste materials, generally thin thickness and large shrinkage coefficient. When checking the appearance quality of rubber plastic floor paint cloth, it should be under scattered sunlight or fluorescent lamp, and the illumination should be ( ± LX, LM from the tested sample, conduct oblique visual inspection. First, observe whether there are cracks, fractures and delaminations on the surface of the local lacquer cloth. If there are, it can be judged that the local lacquer cloth is unqualified. The second step is to observe whether there are wrinkle marks, bubble pollution points and pattern deformation. Those that cannot be observed are excellent products and first-class products; those that are slight but not obvious are recognized as qualified. Go back to the third step for observationIf there is any missing pattern on the surface of the ground lacquer cloth, or if there is any defect of the transparent wear-resistant film on the surface, it is the first-class product and the first-class product. If there is a slight missing print or lack of film, otherwise it is the unqualified product. Finally, carefully check whether there is deviation in the multi-color overprint on the surface, whether there is color difference in different parts, if the top-class product is uneven, if there are the above two defects, but if there is no obvious, it is the first-class productProducts that obviously have the above defects but do not affect the overall beauty are judged as qualified products. Finally, the appearance quality of ground lacquer cloth is determined based on the above judgment. When selecting ground lacquer cloth, first smell whether it has pungent smell. There will be a slight smell after the good coil is opened, and the smell of inferior products is stronger; secondly, calculate the use area and the same room should be selectedCoiled materials with the same batch number, pattern and thickness. When purchasing, carefully observe the appearance quality, open a roll of ground lacquer cloth, separate the ends for a few meters, observe the surface layer of the sample, the surface layer is thick, the wear-resistant layer is thick and the service time is long, and then observe whether there are cracks, fractures,ScarboroughComposite laminate floor, wrinkles, bubbles and large defects; whether the cross section is layered and cracked; whether the pattern is open, missing, lack of film and overprint deviationDefects such as color difference, color difference and pollution.Customer first,The commonly used floor is generally mm thick, and the .mm wear-resistant layer locks the floor.Such a thick floor generally does not have the situation that the door cannot be closed or affect other s, the material will not be very expensive, the foot feels comfortable, the service life is relatively long, and it will not be easily damaged.Consumers who use wood flooring in home decoration know that if it is not maintained properly in the process of normal use, there will be a series of problems with wood flooring.Floor cracking is a common method.Today, we will discuss why the wood floor cracks. Water resistanceMen&#;s long-term inhalation will cause men&#;s abnormal sperm and death.First, the scope of application is small.

It is suitable for floor heating. SPC floor has good thermal conductivity and uniform heat dissipation. It also plays an energy-saving role for families using wall mounted furnace to heat floor heating.SPC floor overcomes the defects of stone, ceramic tile, terrazzo, ice, cold and slippery. It is the first choice for floor heating and heat conduction floor.What are the advantages of SPC flooring:Professional is king,The fire rating reaches B, which is unmatched by ordinary floors.Therefore, many public spaces are also paved with SPC floors, that is to say, this reason.Because of its special structure, solid wood composite floor has low requirements for wood and can make full use of materials, so its price is much cheaper than solid wood composite floor. Veneer method: stick the wood veneer on the board surface.For example, the high price solid wood veneer is pasted on the low price solid wood floor. Although this is also the solid wood floor, it deceives consumers.Scarborough,Some people say that this method is unscientific and laminate floors can&#;t soak in water, but I have done some experiments and come to another conclusionFourth, wear resistance means that it is not easy to scratch with artifact.Some customers want to take a lighter to light the SPC floor to see if it can burn. If it burns, it is not fire safety, and if it doesn&#;t burn, it is flame retardant.In fact, the national regulations on the flame retardant grade of PVC latch floor meet the B Standard, and the flame retardant raw materials are listed as class a fire safety according to the national standard such as marble, wall tiles, etc.The technology of Class B flame retardant grade includes mm diameter cotton wool, sprinkled with ethanol, and placed on the PVC latch floor for natural ignition. After the cotton wool is burned, accurately measure the diameter of the burned PVC latch floor impression. If it is less than mm