The product quality advantages of continuous casting billet of stainless steel pipe fittings are mainly reflected in that the non grinding rate of the outer surface of the billet except the head and tail section has reached more than %, and the total surface grinding yield has reached %. In order to achieve this goal, achieve low oxygen and sulfur content do a good job in the metallurgy of the ladle and tundish, and realize no oxidation casting accurately determine the molten steel temperature, Further reduce the inclusion content.The back is not protected by argon, and the flux cored wire + TIG process has been applied in China for several years. Flux cored wires such as et-elt-et-elt-t-et-elt- have been produced and applied to field welding, and good economic benefits have been obtained.Bog-Walk,Chinese brand cold rolled non oriented silicon steel strip (sheet) means: DW + times of iron loss value (at the frequency of Hz, the magnetic induction peak with sinusoidal waveform is the unit weight iron loss value of t) + times of thickness value. For example, dw- represents cold-rolled non oriented silicon steel with iron loss value of W / kg and thickness of .mm. Now the new model is W.Stop the written technical disclosure, on-site technical and safety disclosure to the on-site operators.Zhengzhou,The corrosion resistance is the same, and the strength is better because the carbon content is relatively high.When using this method, it should be noted that the water-soluble paper should be double-layer and must be pasted well, otherwise it is easy to cause damage and fall off of the water-soluble paper, resulting in loss of argon protection of the inner weld and oxidation resulting in cutting of the weld junction and re welding, which can not ensure the welding quality and seriously affect the construction period. Therefore, the water-soluble paper should be strictly checked and pasted before welding.When the stainless steel pipe with solid core welding wire is prefabricated, the welded junction can usually be rotated for welding, and the ventilation is very easy. At this time, the blocking plate is usually used to block both sides of the welded junction in the pipe, and the bottom welding is carried out for the protection of ventilation (see Table ), and the outside is blocked with adhesive cloth.

Because stainless steel has many ideal properties required by building materials, it can be said to be unique in metals, and its development continues. In order to make stainless steel more neutral in traditional applications, existing types have been improved, and new stainless steel is being developed to meet the strict requirements of advanced architectural applications. Due to the continuous improvement of production efficiency and quality, stainless steel has become one of the cost-effective materials selected by architects. Stainless steel integrates performance, so stainless steel will still be one of the best building materials in the world.The external anti-corrosion coating of stainless steel shall be galvanized and epoxy asphalt coating or coating with higher requirements according to the soil conditions of the pipe laying ground.Inspection: after crimping, check the crimping size with a special gauge.The cheapest,Corrosion resistance of decorative stainless steel pipe the price of different series of stainless steel materials varies greatly. The corrosion resistance of more economical materials can not meet the higher application requirements, and the improvement of corrosion resistance of stainless steel materials by simple chemical passivation is limited. On the other hand, the traditional passivation treatment containing chromium salt has been gradually eliminated, and the passivation treatment of stainless steel has turned to the direction of environmental friendliness. Recently, citric acid passivation and silicon treatment on stainless steel surface have become a new research direction. The former has environmental protection characteristics because its passivation solution component does not contain chromium salt. The latter has found that silicon coupling agent is chemically adsorbed on the metal surface to form a protective silicon film with cross-linked network structure. The length of discoloration time of samples after different surface treatments was compared by blue dot method, the corrosion rate of samples after different surface treatments was distinguished by brine immersion test, and the salt spray resistance of samples after different surface treatments was distinguished by neutral salt spray test, The differences of pitting corrosion resistance and resistance to corrosive medium of samples after different surface treatment were compared by electrochemical test. The film thickness of silicon film was indirectly characterized by film weight test, and scanning electron microscope, energy spectrometer, X-ray diffraction X-ray photoelectron spectroscopy and total reflection Fourier transform infrared spectroscopy characterized the surface films of different surface treated samples, and analyzed the structural composition and corrosion resistance mechanism of different films. Professional stainless steel plate, stainless steel coil, stainless steel belt, stainless steel pipe, high price,Bog-WalkS30409 stainless steel plate, service, on-site settlement, honest management! At present, there are few studies on the combination of citric acid passivation and silicon treatment of stainless steel. Therefore, this paper studies the difference of corrosion resistance of martensitic stainless steel Cr chemical passivation, silicon treatment and the combination of citric acid passivation and acid silicon system treatment, and discusses the corrosion resistance mechanism of different films on its surface, which can provide reference for the new direction of stainless steel surface treatment, It has certain practical guiding significance. The corrosion resistance and mechanism of chemical passivation, silicon treatment and composite treatment of martensitic stainless steel were studied in this paper. The comprehensive comparison of the research results shows that the corrosion resistance of stainless steel treated with different surface treatments is different. The corrosion resistance of the sample treated with silicon alone is better than that treated with traditional dichromate passivation. The corrosion resistance of the composite treated sample treated with citric acid passivation and acid silicon system is further enhanced than that treated with acid silicon system alone. The composite treatment of citric acid passivation and acid silicon system treatment has excellent corrosion resistance and environmental protection characteristics, and is expected to replace the traditional dichromate passivation treatment. According to the film weight test results, the surface silicon film weight of the composite treated sample after citric acid passivation and acid silicon system treatment is lower than that of the sample after acid silicon system treatment alone, indicating that the excellent corrosion resistance of the composite film not only depends on the surface silicon film, but also benefits from its double-layer film structure.The main control load of the platform has high requirements for the shear bearing capacity of the guide leg of the offshore platform. In order to study the factors affecting the shear capacity of the jacket legs of the stainless steel pipe in pipe concrete-filled steel tubular offshore platform, a total of concrete-filled steel tubular shear members were fabricated to study the effects of outer steel pipe material,Bog-WalkPrice of stainless steel pipe, concrete strength, void ratio and shear span ratio on the shear capacity of concrete-filled steel tubular in pipe. It is found that the shear strength of members increases with the decrease of void ratio and the increase of concrete strength; The larger the shear span ratio, the smaller the shear strength. Combined with the test, the empirical formula of shear capacity of concrete-filled steel tubular in pipe is proposed, which is analyzed and verified by ABAQUS finite element modeling software. The results show that the simulation is in good agreement with the test results. In order to study the axial compression performance of stainless steel tube concrete conduit leg and the axial compression performance of stainless steel concrete conduit leg, experiments are used to verify the correctness of the finite element model. The load displacement curves of specimens in groups were compared, and the effects of different void ratio, concrete strength, diameter thickness ratio and bone index on the axial compression performance of concrete-filled stainless steel tubular short columns under axial compression were analyzed. The results show that with the increase of concrete strength,Bog-WalkStainless steel threading pipe, the bearing capacity of specimens increases, but the ductility of specimens decreases; With the increase of void ratio and diameter thickness ratio, the bearing capacity of the specimen decreases; The bearing capacity of stainless steel tube concrete can be effectively improved by adding steel bone; Increasing the bone matching index of steel bone can improve the bearing capacity of the specimen. Based on the jacket offshore platform, so as to improve the ice resistance and disaster prevention ability of the offshore platform. The scale test on the offshore platform shows that the composite offshore platform of concrete filled steel tubular in stainless steel pipe (hereinafter referred to as the composite offshore platform) has better anti icing performance than the ordinary jacket offshore platform. Taking push as an example, the peak acceleration and displacement of the upper deck of the composite offshore platform of concrete filled steel tubular in stainless steel pipe are reduced by % and % respectively. The analysis of ABAQUS finite element and experimental simulation results shows that the error of the two results can be basically within %. Through the simulation analysis of the ultimate bearing capacity of the stainless steel tube in tube concrete-filled steel tubular composite platform and the original offshore platform, it can be seen that the stainless steel tube in tube concrete-filled steel tubular composite platform has stronger ultimate bearing capacity. Therefore, the composite offshore platform of concrete-filled steel tube in stainless steel tube is a good new type of jacket offshore platform. Axial compression tests were carried out on austenitic and duplex stainless steel tube concrete short columns. The ultimate load, longitudinal strain and circumferential strain of the short columns under axial compression were measured. The effects of steel tube wall thickness and concrete strength on the bearing performance of the short columns were investigated. Reference was made to the European Code for design of concrete filled steel tubes (Eurocode), American code (ACI -) and Japanese code (aij-cft), China's relevant regulations D --dlt- and CECS calculate the preparation of stainless steel pipe construction, prepare construction scheme and construction schedule scheme, and the carbon content is less than .%. Other alloying elements are sometimes added. The metallographic structure is mainly ferrite, and there is no & alpha during heating and cooling=& amp; amp; gt;& gamma; The transformation cannot be strengthened by heat treatment. Strong oxidation resistance. At the same time, it also has good hot workability and certain cold workability. Ferritic stainless steel is mainly used to make components with high corrosion resistance and low strength requirements. It is widely used in manufacturing equipment such as production, nitrogen fertilizer and chemical pipelines.

Crimping: during crimping, and the jaw is perpendicular to the pipe axis.Workshop cost,Stainless steel and alloy tool steel (C content is expressed in thousandths), such as thousandth of CrNi (i.e. .% C), stainless C & le; .%, such as CRNI ultra low carbon C & le; .%, such as crnimo.Stainless steel has the ability of atmospheric oxidation, that is, it does not rust. At the same time, it also has the ability of corrosion resistance in the medium containing acid, that is, corrosion resistance. However, its corrosion resistance changes with its own chemical composition, mutual state service conditions and environmental medium type. For example, has absolutely excellent corrosion resistance in dry and clean atmosphere, in the sea fog with a lot of salt, it will soon rust while stainless steel performs well. Therefore, not any kind of stainless steel can resist corrosion and rust at any timeApplication field: launch the market plan of stainless steel pipe in the target market of new products, such as stainless steel kitchen equipment.Bog-Walk,It has the characteristics of high efficiency and low cost. At the same time, it can also well ensure the welding quality (in the capacity expansion and reconstruction project of Urumqi petrochemical, we use this method to weld joints and repair joints, with a one-time qualified rate of welding), which is worthy of our use.The main way to prevent stress corrosion of austenitic stainless steel is to add SI ~ % and keep the content of N below .% from smelting. In addition, the content of impurities such as P, Sb, Bi and as should be reduced as much as possible. In addition, A-F dual phase steel can be selected, which does not correspond to stress corrosion in Cl - and oh - media. The initial micro crack will not continue to expand after encountering ferrite phase, and the ferrite content should be about % .Some reasons for product composition ratio: in order to reduce the production cost, reduce the proportion content of some important elements such as chromium and nickel, and increase the content of other elements such as carbon. This production phenomenon that the composition ratio is not strictly in accordance with the product model and product characteristics not only greatly reduces the product quality, for example, when the chromium content of stainless steel pipe is insufficient, it not only affects the production The corrosion resistance and formability of products have potential product quality and safety hazards when they are used in chemical equipment and production industries. At the same time, they also affect the appearance and oxidation resistance of products.