According to the purpose, it can be divided into oil well pipe (casing, oil pipe and drill pipe), pipeline pipe boiler pipe, hydraulic prop pipe, gas cylinder pipe, geological pipe, chemical pipe (high-pressure chemical fertilizer pipe, petroleum cracking pipe) and marine pipe.Proper heat treatment process can prevent intergranular corrosion and obtain excellent corrosion resistance.Morales,h chemical composition carbon C: Manganese Mn: silicon Si: chromium Cr: nickel Ni: phosphorus P: sulfur s: niobium NB: h stainless steel Name: austenitic stainless steel standard: aisastm model: huns No.: Note: a single value is a high value unless otherwise indicated; when used in some pipe making processes, the nickel content of some models of austenitic stainless steel must be slightly higher than that shown in the table; optional High TA content is .%; high content is .%; high content is the basic characteristics of stainless steel, with high temperature strength and high temperature plasticity, excellent oxidation resistance and corrosion resistance, good structural stability, uniform chemical composition, good processing performance and welding performance, high dimensional accuracy and surface quality. causes of rust when brown spots appear on the surface of stainless steel They were greatly surprised: & rdquo; stainless steel will not rust. Rust is not stainless steel. There may be something wrong with the steel quality. & rdquo; in fact, this is a one-sided wrong view of the lack of understanding of stainless steel. Stainless steel will also rust under certain conditionsThe numbering rules adopt element symbols; Pinyin, open hearth steel: p; Boiling steel: F; Killed steel: B; Class a steel: a; T: special GCr: ball.Quesada,Adjust the ratio of austenite forming elements to ferrite forming elements in the steel to make it have austenite + ferrite dual phase structure, in which ferrite accounts for % - %. This dual phase structure is not easy to produce intergranular corrosion.Restate the quality of stainless steel pipe, such as stainless steel pipe, we promise & ldquo; chromium and nickel & rdquo; Penalty for false and provide quality inspection report and certificate of conformity.At the same time, the Ministry of construction attaches great importance to the application of stainless steel pipes. The industry standard of stainless steel water pipe was issued and implemented in . The Ministry of construction has issued documents on relevant technical specifications and installation sets of pipeline engineering which are being prepared by Tongji University. All kinds of stainless steel plate, stainless steel coil, stainless steel belt and stainless steel pipe are qualified. Welcome to telephone inquiry and sincerely invite cooperation! At present, there are stainless steel pipes in Sichuan, Guangdong, Zhejiang, Jiangsu and other places, and the products have become mature. Therefore, the time for application has come.

The back is blocked with blocking plate for ventilation protection; Only soluble paper or the combination of soluble paper and blocking plate is used for blocking ventilation protection; Use flux cored wire for backing TIG welding.Hot dip galvanized sheet hot dip galvanized sheet, that is, the rolled steel plate is continuously immersed in the zinc melting bath to make galvanized steel plate. Liaocheng Suntory stainless steel plate weighing method: stainless steel plate: thickness (mm) x width (m) x Length (m) x density stainless steel plate: thickness (mm) x width (m) x Length (m) x density stainless steel plate: thickness (mm) x width (m) x Length (m) x density stainless steel basic weight (density)The slab solidified on the surface continues to be rapidly cooled through the secondary cooling section until the core becomes solid, and the whole continuous casting process of stainless steel pipe fittings is completed.Installation material list,The bearing capacity of decorative stainless steel pipe ice load is the main control load of offshore platform in severe cold area, which has high requirements for the shear bearing capacity of jacket leg of offshore platform. In order to study the factors affecting the shear capacity of the jacket legs of the stainless steel pipe in pipe concrete-filled steel tubular offshore platform, concrete strength, void ratio and shear span ratio on the shear capacity of concrete-filled steel tubular in pipe. It is found that the shear strength of members increases with the decrease of void ratio and the increase of concrete strength; The larger the shear span ratio, the smaller the shear strength. Combined with the test, the empirical formula of shear capacity of concrete-filled steel tubular in pipe is proposed which is analyzed and verified by ABAQUS finite element modeling software. The results show that the simulation is in good agreement with the test results. In order to study the axial compression performance of stainless steel tube concrete conduit leg and the axial compression performance of stainless steel concrete conduit leg, experiments are used to verify the correctness of the finite element model. The load displacement curves of specimens in groups were compared, and the effects of different void ratio, concrete strength, diameter thickness ratio and bone index on the axial compression performance of concrete-filled stainless steel tubular short columns under axial compression were analyzed. The results show that with the increase of concrete strength, the bearing capacity of specimens increases, but the ductility of specimens decreases; With the increase of void ratio and diameter thickness ratio, the bearing capacity of the specimen decreases; The bearing capacity of stainless steel tube concrete can be effectively improved by adding steel bone; Increasing the bone matching index of steel bone can improve the bearing capacity of the specimen. A compound forming process of double-layer stainless steel pipe for primary circuit main pipeline of station is designed, which solves the problem of limited length of finished products in traditional forging or casting process, and meets the special requirements of complex working environment on pipeline performance. The three roll cross rolling forming process of double-layer casing with outer layer -n austenitic heat-resistant stainless steel and inner layer cr-ni martensitic heat-resistant stainless steel was simulated and optimized by using DEFORM-D finite element simulation software. The internal and external deformation, stress-strain field and temperature field of double-layer stainless steel pipe were analyzed, and the optimal deformation parameter combination was obtained by orthogonal test. The simulation results show that in the process of three roll cross rolling, the large values of equivalent stress, equivalent strain and temperature are concentrated in the area between the outer tube and the roll, and the overall performance parameters of the outer tube are greater than those of the inner tube. The range analysis and variance analysis of orthogonal design test show that the optimal deformation parameter is rough rolling temperature deg; C. Feed angle & deg;, and accurately shape the end of the stainless steel pipe, so as to obtain the forged joint with better mechanical properties. According to the connection mode of the original pipe system and the plastic forming characteristics of steel pipe, and the forging forming process is analyzedHardness stainless steel pipes are usually measured by Brinell, Rockwell and Vickers hardness indexes.Low temperature processing of stainless steel pipe --- martensite series stainless steel is quenched from austenitizing temperature and then cooled to very low temperature to promote martensite quenching. It is suitable for stainless steel easy to produce residual austenite.

Using CrO and hsoho as the main components and adding an appropriate amount of mnso.ho coloring solution, the chemical coloring of stainless steel industrial pipe was carried out. The effects of pretreatment process, mass concentration and coloring time on the color film of stainless steel industrial pipe were discussed. Through a large number of experiments, a good formula and process range of coloring solution are obtained. With the increase of temperature and time, the film thickness increases, and the color changes are brown, blue, gold, purplish red and green. After curing and sealing treatment, the colored film of stainless steel industrial pipe has more uniform surface color, good reproducibility, and significantly improved wear resistance and corrosion resistance.consumption,The continuous casting of stainless steel pipe fittings is generally matched with the refining furnace, which has strict requirements on the chemical composition and temperature of molten steel; In order to prevent secondary oxidation of molten steel, non oxidation protection pouring is required during continuous casting production; Strict requirements for refractory materials such as ladle, tundish, nozzle and submerged nozzle.The large electric clamping tool is V power supply, and the motor drives the oil cylinder to clamp. The connecting oil pipe and quick connector must not be contaminated, otherwise the dirt entering the oil circuit system will affect the normal use of the tool. Connect the main engine and hydraulic cylinder, turn on the power supply first then tighten the pressure relief valve, wait until the pressure gauge rises to about MPa, or the main engine automatically trips, then open the pressure relief valve, turn off the power supply, and remove the tong head after complete pressure relief.With the implementation of China's reform and opening up, the national economy has achieved rapid growth and a large number of urban houses, public buildings and tourism facilities have been built,Morales2-inch stainless steel pipe, which puts forward new requirements for hot water supply and domestic water supply. In particular, people pay more and more attention to the problem of water quality, and the requirements are also increasing. Galvanized steel pipe, a common pipe,MoralesStainless steel cooling pipe, will gradually withdraw from the historical stage under the influence of relevant countries because of its corrosivity. Plastic pipe, composite pipe and copper pipe have become common pipes in the pipeline system. However, under certain circumstances, stainless steel pipe has more advantages, especially the stainless steel pipe with wall thickness of only . ~ mm. In high-quality drinking water system,Morales316L stainless steel decorative pipe, hot water system and water supply system that puts safety and sanitation first, it has the characteristics of safety, reliability, sanitation, environmental protection, economy and applicability. It has been proved by engineering practice at home and abroad that it is one of the new, energy-saving and environmental protection pipes with good comprehensive performance of water supply system. It is also a very competitive water supply pipe, which will play an incomparable role in improving water quality and people's living standards.Morales,Various welding methods of combined welding stainless steel welded pipe have their own advantages and disadvantages. Combined welding methods include argon arc welding plus plasma welding, high-frequency welding plus plasma weldingWhen improved, it is possible to use it in refrigeration related engineering. Recently, suslx (cr Ti, Nb LC) and susl have been applied to frozen shells. Ferritic stainless steel has body centered cubic structure. When the material properties become weaker, sharp cracks will expand rapidly and cause brittleness. Austenitic series stainless steel will not produce brittleness because it has face centered cubic structure. Austrian stainless steel SUSL (cr-ni LC) and SUSL (cr-ni-mo-lc) shows that it still has superior impact characteristics at low temperature. However, pay attention to the precipitation of ferrite or martensite due to processing, and the tendency of embrittlement due to sensitized carbide or & sigma; equal heterogeneous precipitation.Corrosion resistance of decorative stainless steel pipe the price of different series of stainless steel materials varies greatly. The corrosion resistance of more economical materials can not meet the higher application requirements, and the improvement of corrosion resistance of stainless steel materials by simple chemical passivation is limited. On the other hand, the traditional passivation treatment containing chromium salt has been gradually eliminated, citric acid passivation and silicon treatment on stainless steel surface have become a new research direction. The former has environmental protection characteristics because its passivation solution component does not contain chromium salt. The latter has found that silicon coupling agent is chemically adsorbed on the metal surface to form a protective silicon film with cross-linked network structure. The length of discoloration time of samples after different surface treatments was compared by blue dot method, the corrosion rate of samples after different surface treatments was distinguished by brine immersion test, and the salt spray resistance of samples after different surface treatments was distinguished by neutral salt spray test, The differences of pitting corrosion resistance and resistance to corrosive medium of samples after different surface treatment were compared by electrochemical test. The film thickness of silicon film was indirectly characterized by film weight test, and scanning electron microscope, energy spectrometer, and analyzed the structural composition and corrosion resistance mechanism of different films. Professional stainless steel plate, stainless steel coil, stainless steel belt, stainless steel pipe, high price, service, on-site settlement honest management! At present, there are few studies on the combination of citric acid passivation and silicon treatment of stainless steel. Therefore, this paper studies the difference of corrosion resistance of martensitic stainless steel Cr chemical passivation silicon treatment and the combination of citric acid passivation and acid silicon system treatment, and discusses the corrosion resistance mechanism of different films on its surface, which can provide reference for the new direction of stainless steel surface treatment, It has certain practical guiding significance. The corrosion resistance and mechanism of chemical passivation, silicon treatment and composite treatment of martensitic stainless steel were studied in this paper. The comprehensive comparison of the research results shows that the corrosion resistance of stainless steel treated with different surface treatments is different. The corrosion resistance of the sample treated with silicon alone is better than that treated with traditional dichromate passivation. The corrosion resistance of the composite treated sample treated with citric acid passivation and acid silicon system is further enhanced than that treated with acid silicon system alone. The composite treatment of citric acid passivation and acid silicon system treatment has excellent corrosion resistance and environmental protection characteristics, and is expected to replace the traditional dichromate passivation treatment. According to the film weight test results, the surface silicon film weight of the composite treated sample after citric acid passivation and acid silicon system treatment is lower than that of the sample after acid silicon system treatment alone, indicating that the excellent corrosion resistance of the composite film not only depends on the surface silicon film but also benefits from its double-layer film structure.