Safety performance: Electric elevators not only have the safety device of traditional traction elevators, but also have an overflow valve to prevent excessive system pressure during upward movementSetting requirements: The wall bracket should use the manufacturer's matching standard products.Darmstadt,The upward movement of the hydraulic cylinder involves lifting heavy objects, and the return oil from the upper end of the hydraulic cylinder returns to the oil tank through the explosion-proof electromagnetic directional valve. The additional pressure relief valve is used for adjustment,DarmstadtTatami electric elevator, and the pressure gauge reads the value when observing the pressure gaugeThe function of the lifting platform in a theater is roughly as follows: the main lifting platform arranged in the main performance area of the stage is mainly used to quickly change the scenery. Typically, with&quo; Product; In the music and dance theater stage arranged in a zigzag pattern, the lifting platform, side car platform,Secondly, the lifting platform is driven by electrical energy and lifted by the hydraulic system. During operation, timely inspection of various functions is essential.When the door is closed, except for the gap between the lower part of the door that should not exceed mm, any through-hole and opening size related to the distance between any door and adjacent moving parts, as well as the gap around the door or the gap between parts, should comply with the provisions of Table of GB -.Mechanical devices controlled by cage movement should not be used to open or close the landing door.

Emergency manual valve: In case of power failure, it can cause the car to descend to the nearest floor position and open the doorThe isolation and buffering rubber in various parts of the aluminum alloy electric elevator drive device are intact and tightly fitted.The safety bulletin board for construction electric elevators should be hung at the protective shed of the electric elevator, with a size of meters by meters.Promise and keep promise,Setting requirements: Drainage measures should be set up for the foundation of construction electric elevators to ensure smooth drainage.Setting requirements: The main connection methods between the wall bracket and the building include: connecting the wall bracket with the embedded parts on the wall; Fix with wall bolts; Embedded bolts; Welding with steel structures.Setting requirements: Each landing entrance should be equipped with a landing door, which should cover the opening with its full width, and should not open towards the lifting passage.

With the continuous improvement of urbanization level in China, the number of high-rise buildings in urban areas has sharply increased, and the height of buildings has also continued to grow. This has created a demand for high-altitude lifting platform vehicles. Therefore,DarmstadtSmall electric elevator, in order to meet the needs of the domestic market and the public,DarmstadtFixed electric hydraulic elevator, efforts will inevitably be made to design and produce high-altitude lifting platform vehicles.Packaging strategy,Operating cost advantage and low failure rate: Due to the use of advanced hydraulic systems and good methods, the operating failure rate can be reduced to a low level.Precautions during operation: Mechanical operations should be gentle and smooth and mechanical operations should be avoided, otherwise impact loads will inevitably occur, causing frequent mechanical failures and greatly shortening the service life. Generated during homeworkSetting requirements: The guide rail should be rigid and flexible components such as wire ropes or chains should not be used.DarmstadtSetting requirements: The wall bracket should use the manufacturer's matching standard products.Acceptance: Concrete strength grade C, strength testing report.Installation and dismantling personnel and drivers should hold certificates to work.