Disadvantages: Due to loose tissue and high pressure resistance, the pipe is only used to produce small air conditioning copper rods.Among the three production methods of copper tube, the oxidation method is the most. Because as long as the metal copper is oxidized by the anode and the copper ion of the anode is attached to the tube material, the copper tube can be produced. Thisthod is also the most common method to produce copper materials. It has not only been used for a long time, but also has a mature technology, which is to produce copper tubes through oxidation reaction. This production method is the main production method of copper tubes in China.Nesod tangen, and control the composition of auxiliary materials such as lubricating oil and cleaning agent. The supplier is required to provide technical performance indicators such as viscosity, flash point, acid value and distillation range, and the third-party test report of elements harmful to copper tubes. In the rewinding process, strengthen the cleaning of the copper tube surface to reduce the residue of lubricating oil on the copper tube surface.Do not store too many other products, especially other acid materials and alkali materials, in the warehouse to prevent mutual reaction.Goure,If you want to avoid this kind of situation for a long time, you can choose passivation treatment. In this way, not only is the copper surface serious, it can be cleaned under normal circumstances, but it is not a big problem to keep it in the air for one year or more after ultrasonic treatment and immersion treatment, so this effect is very good.The main force of iron ore futures closed at in The closing price of the day today was the same as that of the previous trading day, including * * * * , * * * , settlement price , trading volume , and position volume . The intraday tradg volume decreased by compared with the previous trading day, and the position volume decreased by compared with the previous trading day. After six consecutive days of downward adjustment, there was a rebound at the bottom of the session today, but it was corrected again later, and the closing was flat.Five of the five major application fields of copper plate, copper bar and copper tube: copper is used in medicine. In the s, Chinese medical inventors Liu Tongqing and Liu Tongle found that copper has extremely strong s, and successfully developed the corresponding & quot; Cancer Suppressing & quot;, which is successful in the near future.

In consideration of the above factors, more and more steel plants have stopped production since October, the demand for iron ore in the future is likely to further deteriorate. The iron ore inventory of the steel plant is relatively high,Nesod tangenBronze tube, and the willingness to further replenish the inventory is not strong. In terms of supply, the fourth quarter is generally the peak period for the shipment of imported ores. Although the production of domestic mines has been reduced due to environmental protection, the quantity of * * * is relatively limited. In general the short-term iron ore market may lack upward momentum.As theation effect of copper material on the agent is weak, the dissolved oxygen and air bubbles in it will corrode it.Among the three production methods of copper tube, the oxidation method is the most. Because as long as the metal copper is oxidized by the anode and the copper ion of the anode is attached to the tube material, the copper tube can be produced. Thisthod is also the most common method to produce copper materials. It has not only been used for a long time, but also has a mature technology, which is to produce copper tubes through oxidation reaction. This production method is the main production method of copper tubes in China.Good quality,The main force of iron ore futures closed at in The closing price of the day today was the same as that of the previous trading day, including * * * * , * * * , settlement price , and position volume . The intraday tradg volume decreased by compared with the previous trading day, and the position volume decreased by compared with the previous trading day. After six consecutive days of downward adjustment there was a rebound at the bottom of the session today, but it was corrected again later, and the closing was flat.If you want to avoid this kind of situation for a long time, you can choose passivation treatment. In this way, not only is the copper surface serious, it can be cleaned under normal circumstances, but it is not a big problem to keep it in the air for one year or more after ultrasonic treatment and immersion treatment, so this effect is very good.The room temperature tensile strength of the annealed red copper sheet is ~ kgf/mm, the elongation is ~%, and the Brinell hardness (HB) is ~

Red copper inventory may end the trend of continuous decline. With the increase of production restriction of steel enterprises and the pressure of demand, the continuous decline of iron ore port inventory may end. In addition, according to the new statistics of * *,Nesod tangen304 stainless steel plate, the available days of imported iron ore of steel mills are days, which is one day lower than that before the National Day,Nesod tangen310s stainless steel seamless pipe, and is on the high side of history. The steel mill said that at present, the iron ore inventory basically meets the production requirements. Considering the future production reduction and restriction, the steel mill is not willing to replenish the inventory.Inspection environment,The price of tube billets was adjusted and lowered mainly due to the production restriction of environmental protection and the weak demand for temperature and weather. Recently, the terminal demand has also shrunk due to the sudden drop in temperature, causing a weak shock. According to the communication with local traders in Cangzhou, various good news last week led to the shipment of thermal expansion pipes in Cangzhou in the past two weeks, which is better in the off-season, and the shipment of some specifications has improved. However, the trading atmosphere in the small and medium-sized pipe market is still cold, it is expected that the market price of Cangzhou seamless pipe will be stable and weak in the near future.The above two types of thermal connection usually use the term welding, because in both cases molten solder is written into the narrow gap on the clean and close solid metal surface of the two devices to be installed.When welding, just add enough filler metal to fill the capillary gap. Too much filler metal will only form a ball at the bottom of the joint or run into the pipe.Nesod tangen,However, it is difficult to change this situation too much in the short term. It is expected that the domestic strip steel price will mainly rise in the short term. It is reported that in order to pursue profits, Tangshan Iron and Steel Group Co., Ltd. is currently increasing the supply of hot coils. It does not rule out that more steel mills in the future are inclined to one end of the plate in pursuit of profits, or to lay hidden dangers for the decline. As far as tomorrow is concerned, the price may still maintain a narrow range of shock operation pattern.This week (-, and the transaction was not ideal. On the bidding day of Shagang last weekend, the price was stable to support the market, and the rising of billets at the weekend drove the market up in a wave, and the price of variety wire rods also rose by yuan at the weekend. However, it was reported that the deal was very poor, which led to the price being s table for the next two days. Until Wednesday, due to the negative outlook on the future market and the reduction of steel billets in the afternoon spiral diving, the market lowered the price. Market price changes, Xinji rose yuan on the rd; For the future market, the off-season is coming, the demand is weakening, and the market wait-and-see mood is getting stronger. But when winter comes, the environmental protection inspection is becoming more and more strict which supports the market. It is expected that the price ofety wire rod will be adjusted in a weak way in the short term.Three of the five major application fields of copper plate, and gun parts in the national defense industry. Every million rounds of copper are produced copper bar and copper tube: copper is used to manufacture, - tons of copper are needed.