Green environmental protection High price performance price ratio: due to different structures, the regulations on wood are not too high. Raw materials can be used flexibly and the price is much lower than that of solid wood flooring.Tipitapa,It is simple to clean, dirt free and easy to clean. The surface of solid wood reinforced composite floor is painted and treated very well, with good wear resistance, and does not need to spend a lot of energy on maintenance. It is reported that good solid wood composite floor in the market can keep the paint bright as new without waxing within years. This is in sharp contrast to the shape and maintenance of wood floor.The first is cleaning to remove oil stains or dust;The second is leveling. The convex part shall be shoveled and polished. The concave part can be made into paste with glue and cement at the weight ratio of :, leveled with a spatula, and then leveled with sandpaper after drying.After the ground is flat, clean and dry, it can be glued and paved.Gluing is the last process before paving, and the tool shall be a toothed rubber scraper.During gluing, glue shall be applied on the ground according to the size of the floor paint cloth, and one piece shall be paved in this order.A width of cm shall be reserved at the joint of the floor paint cloth. No glue shall be applied first, so that the joint can be treated finally.When the glue coated on the ground feels sticky by hand, it can be paved. When pasting pay attention to aligning the sidelines, and use a long handle floor brush to blow out and compact.The joints are generally spliced by overlapping cutting, and the overlapping width is about cm.Align the long steel ruler with the center of the overlap, cut with a cutter along the ruler, then remove the cut edge strips (note that there should be two edge strips, and then close and compact the joint with a pressing roller.The residual glue extruded at the joint shall be wiped clean to avoid affecting the appearance.Then apply a thin layer of joint liquid along the joint.Finally, check whether there are bubbles and whether they are flat.If there are bubbles, use a syringe to insert and suck out the air, and then compact it.Finally, use washing powder to remove the residual glue marks on the lacquer cloth. If they cannot be removed, they can be wiped with alcohol.In this way, the whole process will be completed.Due to the improvement of the living standards of Chinese residents, the grade of interior decoration is also rising, and the decoration materials are increasingly developing towards the fixed decoration direction of elegance, high profile, long service life and good effect.As for the ground, carpet or ordinary floor leather and floor brick is not as long as that of ground lacquer cloth.Kintampo,Third, it is flame retardant, but it can&#;t be burned. Products of well-known brand manufacturers with business history are preferredSecondly, choose the color you want.

One week later, the floor sank to the bottom, and the color of the water turned yellow and black. The water contained a lot of impurities Select the content standard of dispersed formaldehyde.What is the difference between solid wood flooring and solid wood composite flooring?Quality inspection report, Fire protection: the fire rating of SPC floor is B, second only to stone. It will automatically extinguish after leaving the flame for seconds, flame retardant, non spontaneous combustion, and will not produce toxic and harmful gases.It is suitable for occasions with high fire protection requirements. Select the number of wear-resistant revolutionsFinally,TipitapaGround waterproof strip, heat conduction is fast.

Scrape the board with a blade.discount,Advantages of solid wood composite floor:SPC floor has good thermal conductivity, uniform heat discharge, small linear expansion coefficient and relatively stable.In Europe and the United States, Japan and South Korea and other countries and regions, locking SPC floor is the preferred commodity of soil temperature and heat conduction floor, which is especially suitable for laying at home and public places, especially in the cold regions of northern China (suitable for Beijing).： I can&#;t tell the taste. The domestic price of this floor is more than yuan;Tipitapa, Super wear-resistant. The wear-resistant layer on the surface of SPC floor is a transparent wear-resistant layer processed by high technology, and its wear-resistant revolution can reach about revolutions.According to the thickness of wear-resistant layer, the service life of SPC floor is more than - years.SPC floor is a long-life floor, especially suitable for public places with large flow of people and high degree of wear.As the wear-resistant layer on the surface of the laminate floor has good wear resistance, compression resistance impact resistance, fire resistance, flame retardancy and chemical pollution resistance, in daily use, it only needs to be cleaned with a twisted dry rag, mop or vacuum cleaner. If the floor is greasy and dirty, wipe it with a cloth stained with detergent.The floor packaging produced by regular manufacturers shall have the manufacturer&#;s name, address, instructions and executive standards marked in Chinese.Since , the national standard of laminate flooring has been implemented and its name and number is the national standard: GB / T - impregnated paper laminated wood flooring.