Advantages: high wear resistance, good reliability, moisture-proof, good management methods, rich and colorful color and pattern design types, and large price range. Look at the surface of the board.Campechuela,SPC floor has good thermal conductivity, uniform heat discharge, small linear expansion coefficient and relatively stable.In Europe and the United States, Japan and South Korea and other countries and regions, locking SPC floor is the preferred commodity of soil temperature and heat conduction floor, which is especially suitable for laying at home and public places, especially in the cold regions of northern China (suitable for Beijing).When choosing wood flooring in , customers attach great importance to quality.Although the solid wood floor is good, the maintenance is very complicated.In , but also has strong coating adhesion, high definition, good corrosion resistance, strong waterproof, not easy to crack and paint.Kadan,For long-term indoor use, high and medium grade products should be selected, and products produced by well-known brands and regular enterprises should be purchased as far as possible. Such products have sufficient thickness and good interlayer adhesion, and are not easy to layer and curl, you can choose low-grade products, because the price of low-grade products is low, there are many prices to choose from, but many of these products are processed with waste materials, with poor flexibility, generally thin thickness and large shrinkage coefficient. Laminate flooring is generally composed of four layers of composite materials, namely wear-resistant layer, decorative layer, high-density substrate layer and balance (moisture proof)Laminate floor is also called impregnated paper laminated wood floor and laminate floor. Qualified laminate floor is made of one or more layers of special impregnated thermosetting amino resin. Remove spots and stains with special floor cleaner.Do not clean with items with damaging properties, such as metal tools, nylon friction pads and bleaching powder.The core layer of WPC wood floor is thicker than that of SPC floor.WPC boards range from to mm, while SPC boards range from to mm.

SPC floor is an economical floor material. Consumers can enjoy the texture of wood grain or stone grain in use without being bothered by noise.According to the requirements of consumers for sound insulation, blocks, plates or coils can be selected.Floor lacquer cloth, also known as floor leather (not PVC plastic floor), is a kind of paving material. It belongs to rubber plastic products. It is one of the indispensable floor materials for the decoration of power distribution room, substation and communication room. The thickness is -mm. Other thicknesses can be made according to the needs of users. The wear-resistant layer is generally less than or equal to .mm.The choice of lacquer cloth products shall be selected according to the suitability of the site.For example, the size of the product is determined according to the space of the house and the size of the place of use.At the same time, pay attention to the different places of use, and the selected patterns should also be different.For example, in places that need to be kept clean, you can&#;t choose products with convex effect;In solemn places, it is not suitable to choose products with bright colors and messy.The width of coiled floor paint cloth is mm, intermediate layer and surface wear-resistant layer) is divided into mm and mm;The length of each roll of floor leather is m and m.Other specifications and dimensions can be determined by the supplier and the buyer through negotiation.Because of the requirements of production, each roll of floor paint cloth is divided into several sections (the patterns between each two sections are misplaced), so the length of the small section of a roll of floor paint cloth with sections shall be indicated, and the length of the roll of floor paint cloth shall be increased by at least cm (i.e. not less than two complete patterns).Generally, there can only be one section for high-quality products and the number of sections of each volume of first-class products and qualified products shall not exceed ;The length of each section of first-class products shall not be less than m, and the length of each section of qualified products shall not be less than m.When inspecting the appearance quality of floor paint cloth leather it should be visually inspected obliquely under the scattered sunlight or fluorescent lamp with the illuminance of ( ± LX and LM away from the tested sample.First, fractures and delaminations on the surface of the floor leather. If so observe whether there are cracks, it can be determined that the floor leather is unqualified.The second step is to observe whether there are wrinkle marks, bubble pollution points and pattern deformation. What cannot be observed are excellent products and first-class products;If it is slight but not obvious, it is deemed as qualified. Go back to the third step to observe whether there are missing patterns on the surface of the floor leather and whether there are defects of the transparent wear-resistant film on the surface. If there is no, it is the first-class product and the first-class product. If there is slight missing or lack of film, it is the qualified product, otherwise it is the unqualified product.Finally, carefully check whether there is deviation during multi-color overprint on the surface, whether there are color differences in different parts, and if there are the above two defects, the first-class products are those with but not obvious, and the products with obvious above defects but do not affect the overall beauty are determined as qualified products.Finally, based on the above judgment, the appearance quality of ground lacquer cloth is determined.The plastic coil floor paint cloth shall roll the wear-resistant layer outward on the pipe core and shall be externally packaged.The product name, manufacturer name, product mark grade, batch number, quality and length shall be marked at the obvious place of each package.In addition to the above three items that can be directly judged by the senses, it cannot be repaired.The third kind: you can smell the faint smell of wood. This floor shows that there is little glue content.It can reach European standard E levelInstallation materials Select substrate densityDon&#;t pour the floor wax directly on the wooden floor.Otherwise, there will be traces and traces.Carefully apply according to the wood grain direction of the wood floor. Do not apply or the thickness is uneven.Too little application will cause uneven thickness, and too much application will lead to poor film formation.Keeping thin and uniform is the key to waxing.Do not dilute the floor wax with water.Solid wax must be ground after polishing.In particular, the previous agency said that the laminate floor is a waterproof floor which is only the surface layer. In fact, the only taboo in the application of laminate floor is small blisters.

People who have a certain understanding of the manufacturing process of composite wood flooring should know that adhesive is essential, but the whole process of SPC flooring is not adhesive (adhesive releases formaldehyde at high temperature), environmental protection. The real formaldehyde is quickly distinguished from many wood flooring materials, and is more and more loved and used by owners.However, it does not refer to formaldehyde, but refers to that the formaldehyde emission is less than .mg/l, and the harm is small.agent, From the surface coating, there are aluminum oxide, melamine and piano paint.The solid wood floor is made of natural wood after drying and processing. It has natural texture,CampechuelaWhat is laminate flooring, environmental protection and health, good touch and elasticity, and also has good sound insulation, sound absorption and heat insulation performance. It won&#;t feel cold when sitting on the solid wood floor in any season. It is very suitable for families with older children at home.Honest wood flooring can be renovated and continue to be used after professional processing.Solid wood floor also has some shortcomings, not wear-resistant, not moisture-proof, easy to lose luster, so home decoration solid wood floor should pay attention to the usual waxing and maintenance work!The flame retardant grade is B, and the indoor formaldehyde is higher than the national standard.Campechuela,Before installing the solid wood floor, it must be ensured that the floor is dry, flat and free of garbage.Generally, the installation of the floor must be carried out before other decoration works are completed.If the floor is not flat, the installation will cause some floors and keel to hang,CampechuelaFloor construction, which will make a sound when people step on it.Defects: some indoor formaldehyde is restrained, the quality of the sales market is uneven, and most plates are shoddy.In this category, it can be shown that it is a relatively safe commodity.In addition, it should be noted that the release of formaldehyde must take a whole process of time. The formaldehyde content tested at this stage does not represent the long-term formaldehyde content.