Alloy tube is widely used in our daily life, which provides us with great assistance. So what industries are alloy tubes applied to? Let&#;s follow the steps of all manufacturers and have a look together:H-section steel belongs to high-efficiency and economic cutting profile (other cold-formed thin-wall section steel, profiled steel plate, etc.). Due to the reasonable section shape, they can make the steel give more play to its performance and improve the cutting capacity. Different from ordinary I-type, the flange of H-section steel is widened, and the inner and outer surfaces are usually parallel, so it is convenient to connect with other components with high-strength bolts. Its size composition is reasonable, series and models are complete, which is convenient for settingElbasanHardness of reinforcement construction of reinforced mesh on concrete bridge deck; Including key lime mixing and packaging materials, you need to pay attention to calculating the size of the building, and the calculated specifications must meet the quality standards and construction standards.C - section steel is reliable and stable in stress, can be accurately positioned, and is resistant to impact and vibration Moreover, it has good versatility and combination, and has a variety of C-section steel and size selection to ensure its flexibilityPorlamar, Direct rolling pass system. The direct rolling pass system refers to the pass system in which the two open legs of the I-beam pass are on the same side of the roll axis at the same time, and the waist is parallel to the roll axis.a. In the forming process, small internal stress and no scratch on the surface. The alloy pipe produced and processed has higher coordination ability in the scope of size, specification and model of diameter and wall thickness,ElbasanWhere do you sell welded pipes, especially in the production and manufacturing of steel structure design grade thick wall pipe,ElbasanHow much is a ton of high frequency welded pipe, especially medium diameter small thick wall pipe, which has incomparable advantages of other processing technologies, and can meet a large number of customer regulations on the specification and model of alloy pipe.Whether I-section steel is ordinary or light, the moment of inertia of the two main axes of the section is quite different, so it can only be directly used for members bent in the plane of their web or form lattice stressed members. It is not suitable for axial compression members or members with bending perpendicular to the web plane which makes it very limited in the scope of application. I-beam is widely used in buildings or other metal structures.

X-ray or ultrasonic testing shall be carried out for repair welding of alloy pipe, yibai%sx ray or ultrasonic testing shall be carried out. For the spiral welding of alloy pipes for the transportation of water, wastewater, gas, heating steam and other general liquids, X-ray or ultrasonic testing sampling inspection (%) shall be carried out.Galvanized pipe is actually galvanized pipe. This is mainly because it increases the corrosion resistance of the steel pipe, so it is evenly coated with a layer of zinc. It can prevent the erosion of other chemicals such as and steam, and protect the steel strip. It is non-destructive and effectively prolongs its service life. Generally, the steel strip purchased is rolled into a large number by the galvanized pipe manufacturer, so pay attention to it during storage. Miscellaneous scabHonesty and mutual benefit,Nitriding: also known as nitriding, it is the process of penetrating nitrogen atoms into the surface layer of steel. At present, gas nitriding is widely used in the production of alloy steel pipe.The utility model has the advantages that the axial force of the roll is small, the axial movement is small,ElbasanHow much is a 219 welded pipe, the working inclined plane is not required, the pass occupies a small length of the roll body, and more passes can be matched under the condition of a certain length of the roll body.I-beam can be divided into four types according to shape: cold-formed equal edge I-beam, cold-formed unequal edge I-beam, cold-formed inner crimping I-beam and cold-formed outer crimping I-beam.

Due to the relatively high and narrow section size of ordinary I-beam and light I-beam, the moment of inertia of the two main axes of the section is quite different, Cold extrusion. This kind of processing method is more purposeful. Before the preparation of steel processing and extrusion molding, when the extrusion molding is used for mm diameter pipe fittings, the investment of machinery and equipment is less, so the raw material consumption is also very small, and the technology is relatively perfect. Once the tube size is increased, the cold extrusion method must have large cargo capacity and high-power machinery and equipment. Therefore, the automatic control system will be upgraded.General welded pipe: General welded pipe is used to transport low-pressure fluid. It is made of qa, qa and QA steel. It can also be made of other mild steel that is easy to weld. Water pressure, zigzag, flattening and other tests shall be carried out for steel pipes, and there are certain requirements for surface quality. Generally, the delivery length is -m, and fixed length (or double length) delivery is often required. The standard of welded pipe is expressed in nominal diameter (mm or inch). The nominal diameter is different from the actual. Welded pipe can be divided into general steel pipe and thickened steel pipe according to the specified wall thickness, and steel pipe can be divided into threaded and non threaded according to the way of pipe end.I-beam can only be used for beam, while H-beam can be used for load-bearing column of structure.Elbasan,Alloy pipe is a very important way and type of seamless steel pipe. Its use is relatively common. It is widely used in various engineering projects, house construction and building decoration. Its fracture will always be found in the production, manufacturing and key marketing of alloy pipe, That is, many stages of production and processing are not done well. Another is that the seasoning is not enough and the proportion of chemical molecules is wrong. There are all reasons.When it is used for ground heating and hot spring transportation, it can meet the requirements of refrigeration and achieve the practical effect of less damage. It is applicable to water conservancy engineering mining and other industries to meet the provisions of cold, cold and corrosion prevention. In addition, the chemical raw material transmission pipeline has a wide indoor space.At the same height, light I-beam has narrower legs, thinner waist and lighter weight than ordinary I-beam. No. - is large I-beam, and No. - is medium I-beam. Imported I-beam shall be marked with actual specifications dimensions and relevant standards.