Key technical characteristics of alloy pipeMetallization: refers to the process of penetrating metal atoms into the surface layer of alloy steel pipe. It is to alloy the surface layer of steel so that the workpiece surface has the characteristics of some alloy steel. Aluminizing, chromizing, boronizing, siliconizing and so on are commonly used in production.Car slope, Whether the mesh size and wire diameter of electric welding mesh meet the standards→ wide flange and large lateral stiffness. Strong bending resistance.Lokossa,Passivation treatment operation of alloy pipeDry processing technology: after passivation treatment, parts shall be dried with air compression or hot gas, or drying treatment or air drying can be selected.The import and export order of I-beam is generally based on the specifications required in use after determining the corresponding carbon structure steel (or low alloy steel) steel grade. Except for the specification number I-beam has no specific composition and performance series.

Difference and application description between H-beam and I-beamThe advantage of the reinforcement mesh system is ecological. It is filled with natural stone materials. There is a gap between the stone materials to allow plants to grow in it. It can also plant plants on it. It has the dual effects of engineering slope protection and plant slope protection. The Ecological Grid mat is a combination with a height of cm ~ cm, mostly a multi grid box separated by spacer mesh.I-beam is divided into ordinary I-beam and light I-beam. The specification of hot rolled ordinary I-beam is -#. The specification of hot-rolled flexible I-beam supplied through agreement between the supplier and the buyer is -#. I-beam is mainly used in building structure, vehicle manufacturing other industrial structures and fixed panels and cabinets. I-beam is often used together with I-beam.Recommendation and consultation,It is a potential rolled strip steel with rectangular section for general purpose. It is very common on construction sites. Its specifications are expressed in thickness and width. At present, most of the flat steel on the market are finished steel, which can be used ready-made for components, ladders, bridges and fences. Flat steel can also be used as blank for welding rigid steel and slab for laminated thin plate.Plan scheme : Martensitic chromium alloy pipe and chromium alloy pipe with Cr composition exceeding %, without high carbon steel and high chromium alloy pipe. The aqueous solution contains % sodium cyanide % ~ % (volume ratio),Car slopeAlloy tube 40Cr, the solution temperature is ~ ℃, and the solution time is min.Using alloy pipe to produce ring parts can improve the utilization rate of raw materials, simplify the production and manufacturing process, and save raw materials and production and processing construction time, such as roller bearing ring throwing Nowadays,Car slopeHow much is the price of welded pipe, low cost, easy maintenance, durable economic development and convenient product specification transformation. For example, the production of large diameter must be grooved pipe, elbow and similar products. You only need to add some spare parts. The expansion method of hot push can be used to process and manufacture large-diameter, thick wall and thin alloy steel pipes, and can not exceed the working capacity of thick wall pipes of machinery and equipment.Discount,I-beam can be divided into four types according to shape: cold-formed equal edge I-beam, cold-formed unequal edge I-beam, cold-formed inner crimping I-beam and cold-formed outer crimping I-beam.The first is people. Human factors are the control focus of welding. Therefore, before welding, welders with skilled technology and welder certificate shall be selected for necessary technical training and disclosure. It shall not be replaced at will to ensure the relative stability of the welders welding the pipeline.The shape of I-beam is similar to that of H-beam. What is the difference between them?Car slope,→ I-beam can be processed into T-beam, and honeycomb beam can be combined to form various section forms, which greatly meets the needs of engineering design and manufacturing.I-beam also known as steel beam, including rolling section and combined section composed of three plates welded. All I-beams are rolled sections. Due to poor production technology, the inner edge of the flange has a slope of : The rolling of H-beam is different from that of ordinary I-beam. Only one set of horizontal rolls is used. Because its flange is wide and has no inclination (or the inclination is very small), its rolling process and equipment are more complex than ordinary rolling mills. The maximum height of rolled H-section steel that can be produced in China is mm, which exceeds the welded composite section.