The use of water pumps for agricultural drainage and irrigation can improve the ability of agriculture to resist natural disasters, increase production and ensure income, and provide material conditions for agricultural mechanization and water conservancy.　　 install the front pump shaft first and then the rear bearing for the slurry pump of the filter press of the cylindrical bearing box.Vienna,　　Solution: Please perform parameter initialization (item F and re edit the parameter (possible cause: there is a conflict between item F and item f　　After a certain value, water will also vaporize,ViennaIrrigation deep well pump, which is called the vaporization pressure of water at this temperature.Konstanza,　　Strong strength and other advantages. It is widely used as a sealing device for various pumps. Place a water seal ring at the bottom of the packing box, and then place the filler.　　In addition, the sundries inside the pump body and impeller shall be cleaned. Then calibrate the pump shaft and motor shaft of the slurry pump to make them on the same horizontal line.　　 Pipeline layout: Firmly support the water pipe and drain pipe to prevent the force of the pipe from acting on the submersible slurry pump.

　　Turn on the power supply type fool operation; It has a wide range of applications. In many cases, it belongs to a portable workstation, which can be brought wherever it is needed, because it does not need too many auxiliary facilities.　　The system shall be equipped with a fire control cabinet.　　Adjustment. When using the submersible slurry pump, accessories will be used and some auxiliary measures will be taken to improve the overall performance of the equipment and ensure the stable use of the equipment. Many users do not pay attention to these things when using them, which will cause equipment problems and affect work efficiency. So we&#;re usingInspection basis　　 the water pipe shall be short, and the cavitation allowance of the device shall be greater than that of the pump. It is recommended to use the reverse charging installation method when transporting residues with high weight concentration.　　Do not exceed the rated current.　　What is the solution to this situation?

　　Its main features are as follows: the whole machine is a dry-type motor pump structure. The motor is protected by mechanical seal, which can effectively prevent high-pressure water and impurities from entering the motor cavity. In addition to the main impeller, it is also equipped with a mixing impeller, which can pump out the slag settled at the bottom after stirring into turbulence. impellerdiscount,　　 The gas inadvertently entered in the equipment is discharged and good sealing performance is ensured.　　Belt drive shaft seal: the pump seal can be divided into three types: packing seal, auxiliary impeller seal and mechanical seal. The packing seal and the secondary impeller seal will drip during the operation of the pump. Mechanical seal can make no water leak.　　 The fan speed of the water pump is too low,ViennaCorrosive pipeline pump, so the heat cannot be dissipated.Vienna,　　 There may also be mechanical failure of the pump, such as serious damage to the bearing of the pump so that the bore will be 'swept' when the stator and rotor rub against each other, or the impeller will be stuck due to impurities such as water and grass when the pump pumps water　　Flexibility. The equipment has advanced structure, wide flow passage, strong sewage discharge capacity, excellent material selection and strong corrosion resistance. It is suitable for conveying liquids containing solid particles, such as sandstone,ViennaZD slurry pump, but also the household water purifier used in our home. There is a with pump equipment to help us purify water. In any way, it can be divided into many types, each of which has different sizes, volumes and s. Therefore, many people believe that