Due to the relatively high and narrow section size of ordinary I-beam and light I-beam, the moment of inertia of the two main axes of the section is quite different, which makes it very limited in the scope of application. The use of I-beam shall be selected according to the requirements of design drawings.Application scope of alloy pipeOlancito,The product can withstand any range of operating temperature.The finished product has smooth surface, low friction coefficient, flatness error + / - mm / m length wear resistance and maximum temperature of ℃Fatehgarh Sahib,Application characteristics of I-beamI-beam is an economic section high-efficiency profile with more optimized section area distribution and more reasonable strength weight ratio. It is named because its section is the same as the English letter 'H'.The high-temperature passivation treatment of alloy pipe is to obtain the passivation treatment film by heating in the heat treatment equipment. Before passivation treatment, the surface layer of parts must be removed to remove waste. At a higher temperature the passivation treatment film can be obtained according to the transformation temperature and time. The hue of passivation treatment film can refer to the annealing color of alloy pipe, and the main parameters of ambient temperature and time of heat treatment process can be selected.

Stages needing attention in the production and manufacture of alloy tubes Main machines and toolsWith the development of steel structure buildings, only I-beam is not enough, that is, thickened I-beam, which is easy to lose stability for load-bearing columns.Administration,Classification introductionPassivation treatment operation of alloy pipeDue to the relatively high and narrow section size of ordinary I-beam and light I-beam,Olancito25 galvanized pipe 6 meters how much is a piece, the moment of inertia of the two main axes of the section is quite different,OlancitoWholesale price of high frequency welded pipe, which makes it very limited in the scope of application. The use of I-beam shall be selected according to the requirements of design drawings.

Remove defective pipes within the allowable length.Where is good, Hot push hole diameter. More sensitive applications and facilities of such methods require simplicity low cost, durable economic development and convenient product specification transformation. For example, the production of large diameter must be grooved pipe, elbow and similar products. You only need to add some spare parts. The expansion method of hot push can be used to process and manufacture large-diameter, thick wall and thin alloy steel pipes, and can not exceed the working capacity of thick wall pipes of machinery and equipment. The surface of hot-dip galvanized parts is bright and beautiful.C - section steel is reliable and stable in stress, can be accurately positioned, and is resistant to impact and vibration Moreover, it has good versatility and combination, and has a variety of C-section steel and size selection to ensure its flexibilityOlancito,Olancito10CrMoAl alloy pipe,The utility model has the advantages that the axial force of the roll is small, the axial movement is small, and the working slope is not required, I-beam is an I-shaped section steel. The inner surface of the upper and lower flanges has an inclination, which makes the outer flange thin and the inner flange thick. Therefore, the section characteristics of I-beam in the two main planes are very different, and it is difficult to give full play to the strength characteristics in application. Although the thickened I-beam has also appeared in the I-beam market, the structure of the I-beam has determined its torsional performance.Main uses: as a finished material, flat steel can be used to make hoop iron, tools and mechanical parts, and used as building frame structural parts and escalators in buildings. Flat steel is divided into two types according to its shape: plane spring flat steel and single-sided double groove spring flat steel. Hot rolled spring flat steel is mainly used to manufacture leaf springs for automobiles, tractors, railway transportation and other machinery.