For business people of course, it is better to spend less under feasible conditions. For goods such as stainless steel pipes, we can often see that there will be packaging film bags on them. Although they are not heavy, if there are a large number of single purchases, they will also produce certain economic expenses, but why do many people clearly dislike this thing on stainless steel pipes, But I have to accept it. Next, xincoral Xiaobian will tell you why stainless steel pipes need packaging bags.Using CrO and hsoho as the main components and adding an appropriate amount of mnso.ho coloring solution, the chemical coloring of stainless steel industrial pipe was carried out. The effects of pretreatment process, coloring solution temperature mass concentration and coloring time on the color film of stainless steel industrial pipe were discussed. Through a large number of experiments, a good formula and process range of coloring solution are obtained. With the increase of temperature and time, the film thickness increases, and the color changes are brown, blue, gold, the colored film of stainless steel industrial pipe has more uniform surface color, good reproducibility, and significantly improved wear resistance and corrosion resistance.Salvaleon-de-Higuey, the vibration process of mold is matched with protective slag, which can improve the yield of %, save energy and shorten the production cycle, so as to improve the yield of molten steel.Laredo,Stainless steel pipes can be divided into CR series ( Series), Cr Ni series ( Series), Cr Mn Ni series ( Series) and precipitation hardening series ( Series). Series & mdash; Cr Ni Mn austenitic stainless steel series & mdash; Cr Ni austenitic stainless steel.Corrosion resistance of decorative stainless steel pipe the price of different series of stainless steel materials varies greatly. The corrosion resistance of more economical materials can not meet the higher application requirements, and the improvement of corrosion resistance of stainless steel materials by simple chemical passivation is limited. On the other hand, the traditional passivation treatment containing chromium salt has been gradually eliminated, and the passivation treatment of stainless steel has turned to the direction of environmental friendliness. Recently, citric acid passivation and silicon treatment on stainless steel surface have become a new research direction. The former has environmental protection characteristics because its passivation solution component does not contain chromium salt. The latter has found that silicon coupling agent is chemically adsorbed on the metal surface to form a protective silicon film with cross-linked network structure. The length of discoloration time of samples after different surface treatments was compared by blue dot method the corrosion rate of samples after different surface treatments was distinguished by brine immersion test, and the salt spray resistance of samples after different surface treatments was distinguished by neutral salt spray test, The differences of pitting corrosion resistance and resistance to corrosive medium of samples after different surface treatment were compared by electrochemical test. The film thickness of silicon film was indirectly characterized by film weight test, and scanning electron microscope, energy spectrometer, X-ray diffraction X-ray photoelectron spectroscopy and total reflection Fourier transform infrared spectroscopy characterized the surface films of different surface treated samples, and analyzed the structural composition and corrosion resistance mechanism of different films. Professional stainless steel plate, stainless steel coil, stainless steel belt, stainless steel pipe, high price, on-site settlement, honest management! At present,Salvaleon-de-HigueyStainless steel tray with hole, there are few studies on the combination of citric acid passivation and silicon treatment of stainless steel. Therefore,Salvaleon-de-Higuey446 stainless steel plate, this paper studies the difference of corrosion resistance of martensitic stainless steel Cr chemical passivation, silicon treatment and the combination of citric acid passivation and acid silicon system treatment, and discusses the corrosion resistance mechanism of different films on its surface, which can provide reference for the new direction of stainless steel surface treatment, It has certain practical guiding significance. The corrosion resistance and mechanism of chemical passivation, silicon treatment and composite treatment of martensitic stainless steel were studied in this paper. The comprehensive comparison of the research results shows that the corrosion resistance of stainless steel treated with different surface treatments is different. The corrosion resistance of the sample treated with silicon alone is better than that treated with traditional dichromate passivation. The corrosion resistance of the composite treated sample treated with citric acid passivation and acid silicon system is further enhanced than that treated with acid silicon system alone. The composite treatment of citric acid passivation and acid silicon system treatment has excellent corrosion resistance and environmental protection characteristics, and is expected to replace the traditional dichromate passivation treatment. According to the film weight test results, the surface silicon film weight of the composite treated sample after citric acid passivation and acid silicon system treatment is lower than that of the sample after acid silicon system treatment alone, indicating that the excellent corrosion resistance of the composite film not only depends on the surface silicon film but also benefits from its double-layer film structure.The recrystallization temperature changes with the shape variable. When the shape variable is %, the recrystallization temperature drops to ℃, and the recrystallization annealing temperature of cold deformed austenitic stainless steel is ~ ℃. At ℃, it needs to be kept warm for h, fully burned at ℃, and then water-cooled.

Stainless steel pipe is safe, reliable, hygienic, environmentally friendly, economical and applicable. The successful development of pipeline and new reliable, simple and convenient connection makes it have more irreplaceable advantages of other pipes. It will be used more and more in engineering, and the use will be more and more popular. It has a good prospect.Stainless steel pipe will not rust, but it is relatively not easy to rust. It will rust in a specific environment. It will rust if placed in seawater or acid-base environment. Even in the air, it will be corroded and oxidized slowly, but it will take a long time. In general, stainless steel pipes will not rust. However, if the stainless steel pipe is used or maintained improperly, or the environment in which the stainless steel pipe is located is too bad, the stainless steel pipe may rust. When we see rust spots on the steel surface, we can quickly confirm that it is a sign of rust. Why does stainless steel pipe rust? First of all, let's understand the structure of stainless steel pipe: stainless steel pipe is a crystal solid composed of atoms similar to a piece of toys. In addition to iron, it also contains its metal components, nickel, titanium, etc. Chromium and nickel have anti rust function. It forms a protective film - passive film to prevent stainless steel pipe from rusting. Generally, as long as the film is not damaged, broken or contaminated by impurities, the stainless steel pipe will not rust. However, if the blunt film is damaged due to improper use or maintenance, the stainless steel pipe will rust.Typical ferritic stainless steels are Crl, Cr and Cr.Direct labor,When the addition of chromium reaches %, the atmospheric corrosion resistance of steel increases significantly, but when the chromium content is higher, although the corrosion resistance can still be improved, it is not obvious. The reason is that when alloying steel with chromium, the type of surface oxide is changed to be similar to that formed on pure chromium metal. This tightly adhered chromium rich oxide protects the surface from further oxidation. This oxide layer is very thin. Through it, you can see the natural luster of the steel surface, which makes the stainless steel have a unique surface. Moreover, if the surface layer is damaged, the steel surface will react with the atmosphere to repair itself, re form this passive film and continue its protective effect.Stainless steel grade group Series & mdash; Chromium nickel manganese austenitic stainless steel series & mdash; Chromium nickel austenitic stainless steel model & mdash; Good ductility, used for molding products. It can also be machined to harden rapidly. Good weldability. The wear resistance and fatigue strength are better than those of stainless steel.AUSTENITIC FERRITIC duplex stainless steel on the basis of austenitic stainless steel, appropriately increase Cr content and reduce Ni content, and cooperate with remelting treatment. High prices, various specifications of stainless steel plates, CrNiTi stainless steel belts and stainless steel tubes are supplied in time and cost-effective. It has become the preferred brand for many wire products. Welcome to buy! Stainless steel with duplex structure of austenite and ferrite (including ~ % & Delta; - ferrite) can be obtained. Typical steel grades include crniti, ocrnimoti, etc. Duplex stainless steel has good weldability, no heat treatment is required after welding, and its tendency of intergranular corrosion and stress corrosion is also small. However, due to the high Cr content, it is easy to form & sigma; Pay attention when using.

When hoisting stainless steel pipes, public slings, shall be used. It is strictly prohibited to use steel wire rope to avoid scratching the surface; and when hoisting and placing, it shall prevent scratching caused by impact and collision. If there are surface scratches, electric arc traces and surface purification in the process of transportation, storage and processing, it must be completely cleaned, polished with an angle grinder, and then polished Polishing with optical sheet or metallographic sandpaper.Management Department,Stainless steel and alloy tool steel (C content is expressed in thousandths), such as thousandth of CrNi (i.e. .% C), stainless C & le; .%, such as CRNI ultra low carbon C & le; .%, such as crnimo.Stainless welded pipe (grade y) gb- stainless cold plate (grade I)That is stainless steel. The GB brand is CrNi. & mdash; it has better temperature resistance than it.Salvaleon-de-Higuey,There are three main reasons for oxidation of stainless steel: production process, which is one of the reasons for oxidation of steel products. In terms of production process and product characteristics, and it is also one of the main characteristics of steel products different from other steel products. It is specialized in products renewable resources business and business package Including: stainless steel plate, stainless steel coil, stainless steel belt and stainless steel pipe. However, when the oxide film is incomplete and discontinuous due to insufficient or negligent production process, the oxygen in the air will directly react with some elements in the product, resulting in the appearance of oxidation of the product.Austenitic stainless steel. It contains more than % chromium about % nickel and a small amount of molybdenum, titanium, nitrogen and other elements. Good comprehensive performance and resistance to corrosion of various media.Solution treatment. The main purpose of water quenching after heating the steel to ~ ℃ is to dissolve the carbide in austenite and keep this state to room temperature, in order to prevent intergranular corrosion, solid solution treatment is usually used to dissolve CrC in austenite and then cool rapidly. Air cooling can be adopted for parts, and water cooling is generally adopted.