GuadalupeHome floor leather,

Don&#;t pour the floor wax directly on the wooden floor.Otherwise, there will be traces and traces.Carefully apply according to the wood grain direction of the wood floor. Do not apply or the thickness is uneven.Too little application will cause uneven thickness and too much application will lead to poor film formation.Keeping thin and uniform is the key to waxing.Do not dilute the floor wax with water.Solid wax must be ground after polishing.If there are cracks inside the wooden floor, it must be replaced.As a result, the internal cracks will lead to the depression of the wood floor, which has a great impact on the normal use.Guadalupe, The relative density of plate is adopted.Impregnated paper laminated wood floor is a floor made of one or more layers of special paper impregnated with thermosetting amino resin, which is paved on the surface of wood-based board substrate such as particleboard and high-density fiberboard, with a balanced moisture-proof layer on the back and a wear-resistant layer and decorative layer on the front. It is hot pressed and formed. First, it is divided into thin and thick (more than mm and about mm in thickness).Calgary,Only ~ mm thick.In order to prevent local fading due to frequent sunlight exposure, it is best to hang curtains to turn direct light into diffuse light, which is conducive to prolonging the service life of the floor. Pay attention to the fact that hard substances such as metal sharps and shoe staples are easy to scratch the surface of the worn lacquer cloth. Avoid cigarette butts, boiled water and hot objects above ℃ from directly contacting the plate surface. Prevent burning marks and scalding marks. Do not press the surface with rubber pads for a long time,In case of indentation, it is difficult to remove. Although the ground lacquer cloth is flame-retardant and self extinguishing it will decompose harmful gases at high temperature, which will suffocate if inhaled too much. First, pursue foreign goodsIn addition there are impact resistance, anti-static, anti environmental pollution,GuadalupeTop 10 laminate brands, anti smoke, easy installation, easy maintenance,GuadalupeEffect drawing of beautiful seam of imitation wood floor tile, etc.

Solid wood flooring. Select water resistance. Call a deer a horse: the commercial family pretends that the low-priced tree species are high-priced tree species, which is purely to deceive consumers by using the blind spot of consumers&#; knowledge.Sincere service,The floor packaging produced by regular manufacturers shall have the manufacturer&#;s name, address, instructions and executive standards marked in Chinese.Since , the national standard of laminate flooring has been implemented, and its name and number is the national standard: GB / T - impregnated paper laminated wood flooring.Some people say that this method is unscientific and laminate floors can&#;t soak in water, but I have done some experiments and come to another conclusiondurability

Now there are many solid wood floor renovation boards on the market. The renovation boards are processed with solid wood floors as raw materials. They are recycled at low prices and sold at high prices, Common floor types: Use large-scale floor renovation machinery to polish the floor for many times, remove about .mm of paint layer, surface layer and wood layer, and make the floor surface in a new state of fine and smooth after fine sand.The floor corners are ground with a small grinder to make the whole smooth.The standard laminate floor surface should contain aluminum oxide wear-resistant paper. It has g, g, g, and even lower. It is directly sprayed with aluminum oxide on the decorative paper. The state stipulates that the surface wear-resistant revolution of the laminate floor for indoor use should be more than revolutions. Only the floor with g wear-resistant paper can meet the requirements. The wear-resistant revolution of g wear-resistant paperThe number of revolutions can reach -, or even lower than g. It is good if the number of revolutions directly sprayed with aluminum oxide can reach -. For those with low wear-resistant revolutions, the material cost is relatively low; because of its low wear-resistant degree, the tool cost during processing is also low. On the contrary, the cost is much higher if the number of wear-resistant revolutions is high.Guadalupe,If the cracks on the surface of the wooden floor are not serious, or just the cracks on the paint surface of the wooden floor, we can consider renovating the wooden floor, it is about ~ times that of coated wood floor. The conventional thickness is only -mm. The ultra-thin design is a bold innovation in the professional industry. The surface is printed with materials to improve the service life of people flow field. The surface imitates the real wood texture and natural marble texture. In view of the characteristics of raw materials, it has fast heat conduction and long heat storage duration. It is the preferred floor for floor heating.