The curved arm elevator is a lifting equipment used for high-altitude operations, which can cross obstacles for high-altitude operations. When the platform is lifted to any position, it can operate while walking, with a compact structure and flexible turning. The width of its site can ensure that the equipment enters narrow passages and crowded working areas. The backup power device can operate the work platform to reset, and is a convenient transportation method that can be towed to any place. Easy to identify operation panel, multiple mechanical, electrical, and hydraulic safety protection, advanced integrated hydraulic and electrical integrated system.What are the applicable ranges of guide rail hydraulic lifting platforms?TappolkaAccording to mobility, it can be divided into fixed lifting platforms and mobile lifting platforms. Compared to the latter, the former has poor mobility and cannot be moved anytime, anywhere. If you want to move, you must use specialized tools to lift the fixed lifting platform and then place it elsewhere. Despite poor mobility, its reliability is strong, so many people choose this device.The above detailed introduction, I believe everyone has a comprehensive understanding and understanding of the use of hydraulic elevators,Refueling the shaft and other parts with oil. The elevator cannot lift or the lifting force is weak. The pressure adjustment of the overflow valve does not meet the requirements. Adjust the pressure to the required value. Check for internal leakage in the oil cylinder or replace the oil cylinder component. Check for clamping or internal leakage of the reversing valve or replace the valve component. The oil level is too low, and the oil inlet filter is blocked. Add enough oil, Clean the oil filter, check if there is a problem with the oil supply pump, or replace the pump. The loosening device does not lift or the lifting force is weak. The pressure adjustment of the overflow valve does not meet the requirements. Adjust the pressure to the required value. If the oil cylinder leaks, check if the reversing valve is stuck or the internal oil leakage surface is too low. If the oil inlet filter is blocked, the oil supply pump is faulty. Check if the one-way valve core and valve seat are worn or damaged. Check if the one-way valve spring is fatigued or deformed, and if there is a problem with the heavy operating rod mechanism Adjust and replace unqualified parts; Clean the valve components; Check the cleanliness of the hydraulic oil valve core for clamping (manufacturing installation issues, dirt issues)Selection should also adhere to certain principles, and there are many types of brands when understanding. Customers may also face some issues in brand selection when understanding. Therefore,TappolkaSmall lifting platform, when purchasing, do not blindly choose. It is important to have a good understanding of the market, be able to conduct on-site inspections, and determine the scale and level of credit, This way, there will be better judgment when making choices.Guide rail hydraulic elevators are divided into curved arm hydraulic elevators, scissor fork hydraulic elevators, mast hydraulic elevators, and straight arm hydraulic elevators according to their working modes. Hydraulic elevator is a replacement product of folding arm elevator (lifting platform) and scissor fork elevator (lifting platform). It can be widely used in stations, docks, airports, hotels, posts and telecommunications, grain depots, cleaning, decoration of public building facades, installation and maintenance of power systems, and so on. This elevator has the advantages of light weight, self-propelled walking electric starting, self supporting legs, simple operation, large working area, and especially the ability to cross obstacles for high-altitude operations.

To understand the operation of the mechanism, the main focus is on whether it is normal and whether there is noise during use. When faults are found, timely troubleshooting is necessary to ensure the normal operation and use of the machine. During installation, it is necessary to disassemble or adjust the rotating mechanism. In this case, it is necessary to ensure that the rotating mechanism can be parallel to the centerline of the reducer and the centerline of the gear, and of course, the meshing clearance should also be appropriate. If this is not appropriate, then the machinery cannot operate normally.In terms of space occupation, most fixed lifting platforms have a relatively large volume and are not suitable for placement in smaller areas and lower heights. If forcibly placed in such a place, not only will the lifting platform be ineffective but certain parts of the place may also be affected. Therefore, when selecting a fixed lifting platform, it is important to pay attention to the space it occupies. If the occupied space is too large and the height of the workshop where the lifting platform needs to be used is insufficient, manual emergency descent can be used, which is safe, convenient, fast,The top floor height is not affected and can be customized according to the on-site environment.The oil cylinder is built into the platform.Selection should also adhere to certain principles, and there are many types of brands when understanding. Customers may also face some issues in brand selection when understanding. Therefore, when purchasing, do not blindly choose. It is important to have a good understanding of the market, be able to conduct on-site inspections, and determine the scale and level of credit, This way, there will be better judgment when making choices.

Guide rail hydraulic elevators are divided into curved arm hydraulic elevators, scissor fork hydraulic elevators, mast hydraulic elevators, and straight arm hydraulic elevators according to their working modes. Hydraulic elevator is a replacement product of folding arm elevator (lifting platform) and scissor fork elevator (lifting platform). It can be widely used in stations, docks, airports, hotels, posts and telecommunications, municipal gardens, grain depots, cleaning decoration of public building facades, installation and maintenance of power systems, and so on. This elevator has the advantages of light weight, self-propelled walking,TappolkaSmall lifting table, electric starting, self supporting legs, simple operation, and especially the ability to cross obstacles for high-altitude operations.safety requirements ,When using the weight should be evenly distributed, mainly in the center of the countertop. However, for special cases, partial loading is allowed, but the longitudinal load cannot exceed half of the rated load. The horizontal load should not exceed one-third of the rated load, so this detail needs to be noted during use.In order to meet the various needs of logistics and construction enterprises, various elevator manufacturers are upgrading, renovating, and designing new types of elevators. However, regardless of the type of elevator, regular maintenance is necessary. If the maintenance work of the elevator is ignored, the performance of the elevator will continue to decline. So, what components should be paid attention to when maintaining the elevator?Mobile lifting platforms are divided into: four wheel mobile lifting platforms, two wheel traction lifting platforms, modified car lifting platforms,TappolkaMobile small lifting platform, hand push lifting platforms, hand operated lifting platforms, AC/DC dual purpose lifting platforms, self-propelled lifting platforms, diesel engine curved arm self lifting platforms, folding arm lifting platforms, sleeve type lifting platforms, and aluminum alloy lifting platforms.Tappolka,The above detailed introduction, and these details cannot be ignored during the use process.During the operation of electric elevators, it is crucial for people to be able to understand the characteristics and situations of other precautions. Many technical personnel also need to combine other platform issues and contents to determine when operating so that the transportation and use of these lifting platforms and goods can achieve better results and protection.Suitable for - story steel structures or concrete workshops, both internal and external.