From the perspective of environmental protection, the thin one is better than the thick one. Because the thin one uses less glue per unit area. The thick one has less density than the thin one, and the impact resistance is poor but the foot feel is slightly better. In fact, there is little difference between the two. In fact, there is no difference between the thickness and quality of the two kinds of floors. The key is to see personal choice.Defects: small blisters can not be repaired after damage, and the upper foot is poor.Guaran,After the wax on the ground has set, scrape off the protruding part along the ground with a plastic ruler or credit card.Ground lacquer cloth greenPachuka,Seventh, sound insulation and noise reduction. Test: for the ground lacquer cloth with thin thickness, you can tear it by hand. If it can be easily torn off, the tear strength of such ground lacquer cloth can not meet the requirements. After gently rolling up and pressing down, if it can not be restored to the original state and leave an indentation, such a product has poor softness.If the layers can be torn by hand, it indicates that the product layers are not well combined, and stratification will soon occur in future use.Plastic floor paint cloth has the advantages of light weight, good mechanical strength, good foot feeling strength, comfortable foot feeling, wear resistance pollution resistance, heat insulation, sound insulation, moisture resistance, small water absorption, good insulation, self extinguishing, easy cleaning, simple construction convenient maintenance and low price. In a large number of civil buildings and public places, it has high requirements for cleanlinessIt is widely used in the laboratory.Plastic floor paint cloth belongs to soft floor. It is a floor coil produced by coating or calendering on sheet continuous substrate with polyvinyl chloride resin as the main raw material and appropriate additives.The length of each roll of plastic floor paint cloth is m ~ m, the width is mm ~ mm ~ mm, and the total thickness is mm (machine room) ~ mm (plant and public buildings)For long-term indoor use, high and medium grade products should be selected, and are not easy to layer and curl, especially foamed leather, which gives people a comfortable and elegant feeling. If you want to use them for a short time or one-time cover, you can choose low-grade products, because low-grade productsThe price is low and there are many prices to choose from, but many of these products are processed with waste materials, with poor flexibility, generally thin thickness and large shrinkage coefficient. When checking the appearance quality of rubber plastic floor paint cloth, it should be under scattered sunlight or fluorescent lamp, LM from the tested sample, conduct oblique visual inspection. First, observe whether there are cracks, fractures and delaminations on the surface of the local lacquer cloth. If there are, it can be judged that the local lacquer cloth is unqualified. The second step is to observe whether there are wrinkle marks, bubble pollution points and pattern deformation. Those that cannot be observed are excellent products and first-class products; those that are slight but not obvious are recognized as qualified. Go back to the third step for observationIf there is any missing pattern on the surface of the ground lacquer cloth or if there is any defect of the transparent wear-resistant film on the surface, it is the qualified product, otherwise it is the unqualified product. Finally, carefully check whether there is deviation in the multi-color overprint on the surface, whether there is color difference in different parts, if the top-class product is uneven, if there are the above two defects, but if there is no obvious, it is the first-class productProducts that obviously have the above defects but do not affect the overall beauty are judged as qualified products. Finally, the appearance quality of ground lacquer cloth is determined based on the above judgment. When selecting ground lacquer cloth,GuaranDoes laminate floor have formaldehyde, first smell whether it has pungent smell. There will be a slight smell after the good coil is opened, and the smell of inferior products is stronger; secondly, calculate the use area, and the same room should be selectedCoiled materials with the same batch number, pattern and thickness. When purchasing, open a roll of ground lacquer cloth, separate the ends for a few meters, observe the surface layer of the sample, the surface layer is thick, the wear-resistant layer is thick and the service time is long, wrinkles fractures and then observe whether there are cracks, bubbles and large defects; whether the cross section is layered and cracked; whether the pattern is open, missing, lack of film and overprint deviationDefects such as color difference, color difference and pollution.If there are cracks inside the wooden floor, it must be replaced.As a result, the internal cracks will lead to the depression of the wood floor, which has a great impact on the normal use.

You can take some steps to ensure a smooth and seamless installation: remove the base plate and door frame before starting.This will make it easier for your installation team to get the perfect fit.No matter what kind of floor you are currently using, thorough vacuuming will make the rest of the work easier.Ask the installer in advance whether to remove the old floor or decide by himself.Because SPC floor is composed of wear-resistant layer, rock mineral powder and polymer powder, it is certainly not easy not to be waterproof. There is no need to worry about the deformation and mildew of the floor by small blisters.Waterproof and mildew removal are very good, so toilets, restaurants, kitchens and living balconies can be used. Select the number of wear-resistant revolutionsWork courses,If the cracks on the surface of the wooden floor are not serious, or just the cracks on the paint surface of the wooden floor, we can consider renovating the wooden floor, flattening the cracked part of the floor and repainting it. Super durable.The surface of stone plastic floor has a special transparent wear-resistant layer processed by high technology, which is super wear-resistant.Therefore, stone plastic flooring is becoming more and more popular in hospitals, schools, shopping malls, supermarkets, vehicles and other places with large flow of people.Defects: small blisters can not be repaired after damage, and the upper foot is poor.

About strengthening the floor.Service first,However, from the perspective of installation method, laminate floor, multi-layer floor and ordinary flat buckle solid wood floor belong to disposable floor, because they must be fixed with nails or glue and cannot be reused.With the unique tiger Tenon Technology of Tiange floor, it can realize glue free, nail free and dragon free during installation, so that the floor can be disassembled, installed and used repeatedly.For example, in case of water immersion and other accidents, the floor can be quickly removed and reinstalled.If you live for many years and want to move away, you can also remove the floor and reinstall it in a new home. For the floors of some precious tree species such as teak, this is very important, because the logs are more and more precious, and the floor can maintain and increase its value.Then look at the quality.Service is not only related to the guarantee of product quality, but also the performance of corporate image.Some deformation, warping and cracking of floor products appear soon after installation, many of which are caused by improper installation.Therefore, whether the service is professional or not also affects the performance of products. Dust-free installation is popular in floor installation. Dust pollution in home decoration can not be underestimated. For example, in floor installation engineering, sawdust and dust will inevitably appear and float in the air, and its harm is also long-term and serious.People who move into new houses often suffer from a strange disease of 'new house syndrome'. For example, when they get up every morning, they feel suffocated, nausea, and even dizzy;Easy to catch a cold;I often feel uncomfortable in my throat, poor breathing, dizziness and fatigue after a long time.This is because the respiratory tract is infected, and the biggest inducement is the invasion of dust suspended in the air for a long time.In order to avoid dust pollution, it is best to choose dust-free installation.Guaran,Before installing the solid wood floor, it must be ensured that the floor is dry, flat and free of garbage.Generally,GuaranWhat kind of floor is SPC,GuaranAggrandizement wood floor, the installation will cause some floors and keel to hang, which will make a sound when people step on it.Prepare the floor for hardwood installation days later, maggots grow on the floor. This problem occurs because the floor contains a lot of impurities.